Files
Aemeath ac90575b0b
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / Backend (Go: vet, tests, a real ubusd and uhttpd) (push) Blocked by required conditions
CI / Package files (push) Blocked by required conditions
Dawnline 0.20.0
- **Backend rewritten in Go.** One daemon, `dawnlined`, replaces the whole ucode backend: the rpcd plugin, the agent, the CLI and the updater. The package no longer depends on ucode.
- **Per-architecture builds.** The release carries the backend for arm64, ARMv7, mips, mipsle and amd64; the router fetches its own after the package is installed and checks its sha256. Dawnline does not run on other architectures (older ARM, 32-bit x86, RISC-V).
- **Faster on the router.** A firewall sync takes 0.06 s instead of 0.9 s; a full apply takes about 300 ms. The portal is served by the daemon itself, without a CGI process per request.
- **Live pages.** The admin and the portal follow a live stream from the router instead of re-fetching the whole state every 30 seconds.
- **Admin redesigned in the portal's style.** Three sections (Overview · Log · Settings); a server is a page of its own with People, Places and Settings; a device opens as a dialog over its person.
- **Changes wait for «Apply».** Every setting, and a person's access, is staged in one dock before it reaches the router.
- **Configuration rollout.** After a change that makes devices fetch their configuration again, the admin shows how many have fetched it and who has not. Every setting shows beforehand (⟳N) how many devices it will touch.
- **Waiting for a decision.** Overview and People put first the people who need one (access ended, limit reached, a device that does not connect), each with its one action a tap away.
- **Bulk actions on people.** «Select» (or a long press on a card) picks several people to extend by a month, pause or resume at once.
- **Undo.** An action done from a card or a request is undone from its toast.
- **Update dialogs redesigned.** An update is one view from its question to its result; Dawnline's own update runs in it like every other, and the page reloads itself once the new version answers. Other versions are a list, each with its notes and Install on a page of its own.
- **Site to site: networks behind a router.** A router connected as a device can have networks behind it (up to eight, /16 to /30): the server routes them and applies the router's access to them. A network that shares addresses with a tunnel, the router's own networks or another site is refused by name.
- **Routers from the portal.** People can add a router and name its networks on their own page; the admin accepts or declines with a reason, or lets them through without asking.
- **Check access and Health know the networks behind routers.**
- **Usage limits reworked.** A monthly limit no longer follows the calendar. A person's month starts with their first traffic and ends a month later; the next one starts only when they connect again, so time away uses up none of it. Before, everyone's limit reset on the 1st.
- Extra data lasts until that person's month ends; «Reset usage» starts the month anew.
- A limit is for a month or for the whole term; the admin and the portal show when it resets.
- Charts that said «this month» show the last 30 days.
- After the update nobody loses what was counted: the month that was running becomes the person's first and ends on the 1st.
- **Access by time of day removed.** The Hours limit is gone from the admin, the portal and the backend; saved hours are dropped.
- **Expiry simplified.** An end date always stops access, with a heads-up three days before; the per-person choice is gone.
- **No false disconnects from sleeping phones.** A phone or a tablet stays online through ten minutes of silence.
- **Mobile Safari fixes.** Pressing a control no longer sends the page to its top; tab tracks that do not fit scroll; switches animate after a press.
2026-11-13 09:43:50 +03:00

175 lines
5.5 KiB
Go

// What follows from the settings about time and tunnels: a device's keep-alive, how long it may go
// between two handshakes, how long after one it still counts as online, and which tunnel a server has.
// As dawnline.core, dawnline.awg and dawnline.live work them out (tests/ucode/awg.test.uc has the cases
// these are held to). Pure: the settings in, numbers out.
package model
import (
"net/netip"
"regexp"
"strconv"
"strings"
)
const (
// OnlineWindow is how long after its handshake a device counts as online, at the least: a WireGuard
// session is dropped 180 s after its handshake and a device that is there renews it every 2 minutes
// (a little slack for a renewal that needs a retry).
OnlineWindow = 190
// SleepWindow is the same for a phone or a tablet: asleep, its system holds the tunnel's timers and its
// session lapses for minutes and comes back by itself. That silence is sleep, not leaving.
SleepWindow = 600
// A device's own keep-alive is taken within this range (seconds; 0 is off).
keepaliveMax = 600
)
// DeviceKeepalive is the keep-alive a device's configuration carries, in seconds (0: off): its own when the
// admin set one, else the server's.
func DeviceKeepalive(srv *Server, dev *Device) int {
if dev != nil && dev.Keepalive != nil && *dev.Keepalive >= 0 && *dev.Keepalive <= keepaliveMax {
return *dev.Keepalive
}
return srv.Keepalive
}
// KeepaliveRange is that keep-alive as the device sends it, lo to hi seconds; ok is false when it is off.
// With header protection (AmneziaWG 3.1, whose apps take ranges) it is jittered over ten seconds, since a
// fixed beat would be the one regular thing left.
func KeepaliveRange(srv *Server, dev *Device) (lo, hi int, ok bool) {
k := DeviceKeepalive(srv, dev)
if k <= 0 {
return 0, 0, false
}
if srv.Obf["header_protection_key"] != "" {
return k, k + 10, true
}
return k, k, true
}
// IdleHandshake is the longest an idle device goes between two handshakes, in seconds; ok is false when
// its keep-alive is off (an idle device then sends nothing at all). Its keep-alives are what it sends, and
// the first one after its key's rekey time (WireGuard's 120 s; past 180 s the key is refused anyway)
// starts a handshake: up to one keep-alive past that time, or each keep-alive once they are further apart.
func IdleHandshake(srv *Server, dev *Device) (int, bool) {
lo, hi, ok := KeepaliveRange(srv, dev)
if !ok {
return 0, false
}
rekey := 120
if _, top, given := uintRange(srv.Obf["rekey_after_time"], 65535); given && top != 0 {
rekey = top
}
rekey = min(rekey, 180)
if lo > rekey {
return hi, true
}
return rekey + hi, true
}
// OnlineWindowOf is how long after its last handshake a device still counts as online, in seconds:
// OnlineWindow, or 30 s more than an idle device goes between handshakes when that is longer (it renews
// its session only with its keep-alive, and a fixed window would see it leave and come back between two).
// A phone or a tablet never less than SleepWindow.
func OnlineWindowOf(srv *Server, dev *Device) int {
w := OnlineWindow
if srv != nil {
if h, ok := IdleHandshake(srv, dev); ok {
w = max(w, h+30)
}
}
if dev != nil && has(MobileKinds, dev.Kind) {
w = max(w, SleepWindow)
}
return w
}
// uintOf is a whole number as AmneziaWG writes one, up to top.
func uintOf(s string, top int) (int, bool) {
if s == "" || len(s) > 10 {
return 0, false
}
for i := 0; i < len(s); i++ {
if s[i] < '0' || s[i] > '9' {
return 0, false
}
}
n, err := strconv.Atoi(s)
return n, err == nil && n <= top
}
// uintRange is a number or a range as AmneziaWG writes them ("5", "5-15"), each end up to top.
func uintRange(v string, top int) (lo, hi int, ok bool) {
p := strings.Split(strings.TrimSpace(v), "-")
if len(p) > 2 {
return 0, 0, false
}
lo, ok = uintOf(p[0], top)
if !ok {
return 0, 0, false
}
hi = lo
if len(p) == 2 {
if hi, ok = uintOf(p[1], top); !ok {
return 0, 0, false
}
}
return lo, hi, lo <= hi
}
// Tunnel is a server's link.
type Tunnel struct {
Ifname string
Subnet string
// Address is the router's own in the tunnel: the subnet's first.
Address string
}
var ifname = regexp.MustCompile(`^[a-z][a-z0-9_]{0,11}$`)
// ValidIfname tells a server's interface name: also a netifd section and an nftables string, so nothing else.
func ValidIfname(s string) bool { return ifname.MatchString(s) }
// TunnelOf is the server's tunnel: it has one when it has its keys, is not kept down, and its interface's
// name and subnet are usable.
func TunnelOf(srv *Server) (Tunnel, bool) {
if srv == nil || srv.PrivateKey == "" || srv.Blocked != nil || !ValidIfname(srv.Ifname) {
return Tunnel{}, false
}
p, ok := parseCIDR(srv.Subnet)
if !ok {
return Tunnel{}, false
}
return Tunnel{Ifname: srv.Ifname, Subnet: srv.Subnet, Address: p.Masked().Addr().Next().String()}, true
}
// TunnelIfnames is the interfaces of the servers that run: turned on, with a tunnel that is Dawnline's.
// What the tunnels' reader is asked for.
func (m *Model) TunnelIfnames() []string {
out := []string{}
for _, id := range m.serverIDs {
srv := m.Servers[id]
if !srv.Enabled {
continue
}
if t, ok := TunnelOf(srv); ok {
out = append(out, t.Ifname)
}
}
return out
}
var cidr = regexp.MustCompile(`^[0-9.]+/[0-9]+$`)
// parseCIDR reads "a.b.c.d/len" with a prefix a tunnel can have (8 to 30).
func parseCIDR(s string) (netip.Prefix, bool) {
if !cidr.MatchString(s) {
return netip.Prefix{}, false
}
p, err := netip.ParsePrefix(s)
if err != nil || !p.Addr().Is4() || p.Bits() < 8 || p.Bits() > 30 {
return netip.Prefix{}, false
}
return p, true
}