From 59979e9dbafcec0f598b2d869a3cc83bf29fafea Mon Sep 17 00:00:00 2001 From: kzolotarev95 Date: Sun, 28 Jun 2026 16:45:20 +0400 Subject: [PATCH] Add direct web panel installer --- .gitattributes | 7 +- .gitignore | 1 + README.md | 136 +++-- .../files => files}/etc/config/fullbackup | 0 .../files => files}/usr/sbin/owrt-full-backup | 0 files/www/cgi-bin/owrt-full-backup | 483 ++++++++++++++++++ install.sh | 116 +++++ package/openwrt-full-backup/Makefile | 36 -- uninstall.sh | 33 ++ 9 files changed, 704 insertions(+), 108 deletions(-) rename {package/openwrt-full-backup/files => files}/etc/config/fullbackup (100%) rename {package/openwrt-full-backup/files => files}/usr/sbin/owrt-full-backup (100%) create mode 100644 files/www/cgi-bin/owrt-full-backup create mode 100644 install.sh delete mode 100644 package/openwrt-full-backup/Makefile create mode 100644 uninstall.sh diff --git a/.gitattributes b/.gitattributes index 806f91b..33aca80 100644 --- a/.gitattributes +++ b/.gitattributes @@ -6,5 +6,8 @@ .gitignore text eol=lf LICENSE text eol=lf Makefile text eol=lf -package/openwrt-full-backup/files/usr/sbin/owrt-full-backup text eol=lf -package/openwrt-full-backup/files/etc/config/fullbackup text eol=lf +install.sh text eol=lf +uninstall.sh text eol=lf +files/usr/sbin/owrt-full-backup text eol=lf +files/etc/config/fullbackup text eol=lf +files/www/cgi-bin/owrt-full-backup text eol=lf diff --git a/.gitignore b/.gitignore index b3eddd0..772c9e5 100644 --- a/.gitignore +++ b/.gitignore @@ -1,6 +1,7 @@ *.ipk *.tar.gz *.tar.gz.sha256 +.test-output/ build_dir/ bin/ dl/ diff --git a/README.md b/README.md index b765696..9b94ff2 100644 --- a/README.md +++ b/README.md @@ -1,101 +1,97 @@ -# openwrt-full-backup +# OpenWrt Full Backup Web -OpenWrt package overlay for creating and restoring a single backup archive with: +Direct web panel for OpenWrt backup and restore. No OpenWrt buildroot package or `.ipk` build is required. -- sysupgrade configuration backup; -- installed package list and opkg metadata; -- OpenWrt release, board, mount, partition and UCI metadata; -- optional `/overlay/upper` snapshot; -- optional `/rom` read-only rootfs snapshot; -- optional copy of a sysupgrade firmware image; -- optional raw MTD dumps for same-device disaster recovery. +It installs: -The scripts target OpenWrt `/bin/sh` (BusyBox ash) and are intended for OpenWrt 22.x, 23.x, 24.x and 25.x. +- `/usr/sbin/owrt-full-backup` command line helper; +- `/www/cgi-bin/owrt-full-backup` web panel; +- `/etc/config/fullbackup` defaults; +- `/etc/owrt-full-backup/web.key` secret web key. -## Build +Target: OpenWrt 22.x, 23.x, 24.x and 25.x. -Copy this repository into an OpenWrt build tree, or copy `package/openwrt-full-backup` into the build tree `package/` directory. +## Install From Git ```sh -make menuconfig -# Utilities -> openwrt-full-backup -make package/openwrt-full-backup/compile V=s +git clone https://github.com/kzolotarev95/openwrt-full-backup.git +cd openwrt-full-backup +sh install.sh ``` -The package installs two commands: +One-line install: ```sh -owrt-full-backup -owrt-backup +wget -O - https://raw.githubusercontent.com/kzolotarev95/openwrt-full-backup/main/install.sh | sh ``` -## Create Backup +The installer prints a private panel link: -Recommended backup to USB or another persistent mount: +```text +http://192.168.1.1/cgi-bin/owrt-full-backup?key=SECRET +``` + +Keep this link private. + +## Web Panel + +The panel can: + +- create a full backup archive; +- download created archives; +- inspect an existing archive; +- restore configs; +- optionally reinstall saved package list; +- optionally restore overlay; +- optionally flash firmware image from the archive; +- save default backup settings. + +Restore from the web panel does not reinstall packages unless you tick that checkbox. + +## Remove + +From a cloned repo: + +```sh +sh uninstall.sh +``` + +One-line remove: + +```sh +wget -O - https://raw.githubusercontent.com/kzolotarev95/openwrt-full-backup/main/uninstall.sh | sh +``` + +Remove config and web key too: + +```sh +wget -O - https://raw.githubusercontent.com/kzolotarev95/openwrt-full-backup/main/uninstall.sh | PURGE=1 sh +``` + +Backup archives are not deleted by uninstall. + +## CLI Examples + +Create backup to USB: ```sh owrt-full-backup create -o /mnt/usb ``` -Include the exact sysupgrade image if you have it on the router: +Include firmware image if it is already on the router: ```sh owrt-full-backup create -o /mnt/usb --firmware-image /tmp/openwrt-sysupgrade.bin ``` -Include the read-only firmware root filesystem snapshot: +Inspect backup: ```sh -owrt-full-backup create -o /mnt/usb --include-rom +owrt-full-backup inspect /mnt/usb/router-owrt-full-backup.tar.gz ``` -Create a same-device raw flash dump too: +Restore configs only: ```sh -owrt-full-backup create -o /mnt/usb --include-raw-mtd +owrt-full-backup restore /mnt/usb/router-owrt-full-backup.tar.gz --yes --no-packages ``` - -Raw MTD dumps are not portable between different models or partition layouts. - -## Restore - -Safe restore mode restores configs and reinstalls packages from feeds: - -```sh -owrt-full-backup restore /mnt/usb/router-backup.tar.gz --yes -``` - -Restore only configs: - -```sh -owrt-full-backup restore /mnt/usb/router-backup.tar.gz --yes --no-packages -``` - -Restore the overlay snapshot too, only on the same device and preferably the same OpenWrt release: - -```sh -owrt-full-backup restore /mnt/usb/router-backup.tar.gz --yes --overlay -``` - -Flash firmware from the archive: - -```sh -owrt-full-backup restore /mnt/usb/router-backup.tar.gz --yes --flash-firmware -``` - -Firmware flashing uses `sysupgrade` and reboots the device. The original OpenWrt sysupgrade image is usually not stored on the router, so include it at backup time with `--firmware-image` if you need this. - -## Default Config - -The package installs `/etc/config/fullbackup`: - -```uci -config backup 'main' - option output_dir '/tmp' - option include_overlay '1' - option include_rom '0' - option include_raw_mtd '0' - option keep_days '0' -``` - -Use `/tmp` only for quick tests. Real backups should go to USB, network storage, or a mounted persistent disk. diff --git a/package/openwrt-full-backup/files/etc/config/fullbackup b/files/etc/config/fullbackup similarity index 100% rename from package/openwrt-full-backup/files/etc/config/fullbackup rename to files/etc/config/fullbackup diff --git a/package/openwrt-full-backup/files/usr/sbin/owrt-full-backup b/files/usr/sbin/owrt-full-backup similarity index 100% rename from package/openwrt-full-backup/files/usr/sbin/owrt-full-backup rename to files/usr/sbin/owrt-full-backup diff --git a/files/www/cgi-bin/owrt-full-backup b/files/www/cgi-bin/owrt-full-backup new file mode 100644 index 0000000..61e56c0 --- /dev/null +++ b/files/www/cgi-bin/owrt-full-backup @@ -0,0 +1,483 @@ +#!/bin/sh + +BACKEND="${BACKEND:-/usr/sbin/owrt-full-backup}" +KEY_FILE="${KEY_FILE:-/etc/owrt-full-backup/web.key}" +PARAMS_FILE="${TMPDIR:-/tmp}/owrt-full-backup-cgi.$$" +RESULT_FILE="" +RESULT_TITLE="" +RESULT_CODE="" +PROJECT_URL="${PROJECT_URL:-https://github.com/kzolotarev95/openwrt-full-backup}" +RAW_URL="${RAW_URL:-https://raw.githubusercontent.com/kzolotarev95/openwrt-full-backup/main}" + +cleanup() { + rm -f "$PARAMS_FILE" + if [ -n "$RESULT_FILE" ]; then + rm -f "$RESULT_FILE" + fi +} + +trap cleanup EXIT INT TERM + +html_escape() { + sed 's/&/\&/g; s//\>/g; s/"/\"/g' +} + +h() { + printf '%s' "$1" | html_escape +} + +url_decode() { + local data + data="$(printf '%s' "$1" | sed 's/+/ /g; s/%/\\x/g')" + printf '%b' "$data" +} + +parse_params() { + local data old_ifs pair key value + data="$1" + old_ifs="$IFS" + IFS='&' + for pair in $data; do + key="${pair%%=*}" + value="${pair#*=}" + [ "$pair" = "$key" ] && value="" + key="$(url_decode "$key" | tr -d '\r\n\t')" + value="$(url_decode "$value" | tr '\r\n\t' ' ')" + [ -n "$key" ] && printf '%s\t%s\n' "$key" "$value" >>"$PARAMS_FILE" + done + IFS="$old_ifs" +} + +param() { + awk -F ' ' -v k="$1" '$1 == k { print $2; exit }' "$PARAMS_FILE" +} + +has_param() { + awk -F ' ' -v k="$1" '$1 == k { found = 1 } END { exit(found ? 0 : 1) }' "$PARAMS_FILE" +} + +read_request() { + local post_data + : >"$PARAMS_FILE" + parse_params "${QUERY_STRING:-}" + if [ "${REQUEST_METHOD:-GET}" = "POST" ] && [ -n "${CONTENT_LENGTH:-}" ]; then + post_data="$(dd bs=1 count="$CONTENT_LENGTH" 2>/dev/null)" + parse_params "$post_data" + fi +} + +config_get() { + local key default value + key="$1" + default="$2" + if command -v uci >/dev/null 2>&1; then + value="$(uci -q get "fullbackup.main.$key" 2>/dev/null || true)" + [ -n "$value" ] && { + printf '%s' "$value" + return + } + fi + printf '%s' "$default" +} + +web_key() { + cat "$KEY_FILE" 2>/dev/null +} + +self_url() { + printf '%s' "${SCRIPT_NAME:-/cgi-bin/owrt-full-backup}" +} + +authorized() { + local expected supplied + expected="$(web_key)" + supplied="$(param key)" + [ -n "$expected" ] && [ "$supplied" = "$expected" ] +} + +http_html() { + printf 'Content-Type: text/html; charset=utf-8\r\n\r\n' +} + +http_unauthorized() { + http_html + cat <<'EOF' +OpenWrt Full Backup +

Access denied

Open the panel with the secret key printed by install.sh.

+EOF +} + +valid_abs_path() { + case "$1" in + /*) ;; + *) return 1 ;; + esac + printf '%s' "$1" | grep -Eq '^/[A-Za-z0-9._/-]+$' +} + +download_file() { + local file base + file="$(param file)" + valid_abs_path "$file" || { + http_html + printf '

Bad file path.

' + exit 0 + } + case "$file" in + *.tar.gz|*.tar.gz.sha256) ;; + *) http_html; printf '

Only backup archives and checksums can be downloaded.

'; exit 0 ;; + esac + [ -f "$file" ] || { + http_html + printf '

File not found.

' + exit 0 + } + base="$(basename "$file")" + case "$file" in + *.sha256) printf 'Content-Type: text/plain\r\n' ;; + *) printf 'Content-Type: application/gzip\r\n' ;; + esac + printf 'Content-Disposition: attachment; filename="%s"\r\n\r\n' "$base" + cat "$file" + exit 0 +} + +run_backend() { + RESULT_TITLE="$1" + shift + RESULT_FILE="${TMPDIR:-/tmp}/owrt-full-backup-result.$$" + if [ ! -x "$BACKEND" ]; then + RESULT_CODE=127 + printf 'Backend is not installed: %s\n' "$BACKEND" >"$RESULT_FILE" + return + fi + "$BACKEND" "$@" >"$RESULT_FILE" 2>&1 + RESULT_CODE="$?" +} + +handle_create() { + local output_dir name firmware + output_dir="$(param output_dir)" + name="$(param name)" + firmware="$(param firmware_image)" + [ -n "$output_dir" ] || output_dir="$(config_get output_dir /tmp)" + valid_abs_path "$output_dir" || { + RESULT_TITLE="Create backup" + RESULT_CODE=2 + RESULT_FILE="${TMPDIR:-/tmp}/owrt-full-backup-result.$$" + printf 'Bad output directory. Use an absolute path, for example /mnt/usb.\n' >"$RESULT_FILE" + return + } + + set -- create -o "$output_dir" + [ -n "$name" ] && set -- "$@" -n "$name" + has_param include_overlay || set -- "$@" --no-overlay + has_param include_rom && set -- "$@" --include-rom + has_param include_raw_mtd && set -- "$@" --include-raw-mtd + [ -n "$firmware" ] && set -- "$@" --firmware-image "$firmware" + run_backend "Create backup" "$@" +} + +handle_inspect() { + local archive + archive="$(param archive)" + valid_abs_path "$archive" || { + RESULT_TITLE="Inspect backup" + RESULT_CODE=2 + RESULT_FILE="${TMPDIR:-/tmp}/owrt-full-backup-result.$$" + printf 'Bad archive path.\n' >"$RESULT_FILE" + return + } + run_backend "Inspect backup" inspect "$archive" +} + +handle_restore() { + local archive confirm + archive="$(param archive)" + confirm="$(param confirm)" + if [ "$confirm" != "RESTORE" ]; then + RESULT_TITLE="Restore backup" + RESULT_CODE=2 + RESULT_FILE="${TMPDIR:-/tmp}/owrt-full-backup-result.$$" + printf 'Type RESTORE to confirm restore.\n' >"$RESULT_FILE" + return + fi + valid_abs_path "$archive" || { + RESULT_TITLE="Restore backup" + RESULT_CODE=2 + RESULT_FILE="${TMPDIR:-/tmp}/owrt-full-backup-result.$$" + printf 'Bad archive path.\n' >"$RESULT_FILE" + return + } + + set -- restore "$archive" --yes + has_param restore_configs || set -- "$@" --no-configs + has_param restore_packages || set -- "$@" --no-packages + has_param restore_overlay && set -- "$@" --overlay + has_param flash_firmware && set -- "$@" --flash-firmware + run_backend "Restore backup" "$@" +} + +handle_save_defaults() { + local output_dir include_overlay include_rom include_raw_mtd keep_days + RESULT_TITLE="Save defaults" + RESULT_CODE=0 + RESULT_FILE="${TMPDIR:-/tmp}/owrt-full-backup-result.$$" + output_dir="$(param default_output_dir)" + keep_days="$(param keep_days)" + valid_abs_path "$output_dir" || { + RESULT_CODE=2 + printf 'Bad output directory.\n' >"$RESULT_FILE" + return + } + case "$keep_days" in ''|*[!0-9]*) keep_days=0 ;; esac + has_param default_include_overlay && include_overlay=1 || include_overlay=0 + has_param default_include_rom && include_rom=1 || include_rom=0 + has_param default_include_raw_mtd && include_raw_mtd=1 || include_raw_mtd=0 + + if command -v uci >/dev/null 2>&1; then + uci -q batch <"$RESULT_FILE" 2>&1 +set fullbackup.main=backup +set fullbackup.main.output_dir='$output_dir' +set fullbackup.main.include_overlay='$include_overlay' +set fullbackup.main.include_rom='$include_rom' +set fullbackup.main.include_raw_mtd='$include_raw_mtd' +set fullbackup.main.keep_days='$keep_days' +commit fullbackup +EOF + RESULT_CODE="$?" + [ "$RESULT_CODE" = "0" ] && printf 'Defaults saved.\n' >>"$RESULT_FILE" + else + RESULT_CODE=127 + printf 'uci command not found.\n' >"$RESULT_FILE" + fi +} + +handle_action() { + local action + action="$(param action)" + case "$action" in + create) handle_create ;; + inspect) handle_inspect ;; + restore) handle_restore ;; + save_defaults) handle_save_defaults ;; + esac +} + +system_value() { + case "$1" in + host) hostname 2>/dev/null || printf 'openwrt' ;; + release) + if [ -r /etc/openwrt_release ]; then + . /etc/openwrt_release 2>/dev/null + printf '%s %s' "${DISTRIB_ID:-OpenWrt}" "${DISTRIB_RELEASE:-unknown}" + else + printf 'OpenWrt unknown' + fi + ;; + board) + if [ -r /tmp/sysinfo/board_name ]; then + cat /tmp/sysinfo/board_name + else + printf 'unknown' + fi + ;; + esac +} + +checkbox_attr() { + [ "$1" = "1" ] && printf ' checked' +} + +backup_rows() { + local dir key file base size mtime + dir="$(config_get output_dir /tmp)" + key="$(h "$(param key)")" + [ -d "$dir" ] || { + printf 'Output directory does not exist.' + return + } + for file in "$dir"/*-owrt-full-backup.tar.gz; do + [ -f "$file" ] || continue + base="$(basename "$file")" + size="$(ls -lh "$file" 2>/dev/null | awk '{print $5}')" + mtime="$(ls -l "$file" 2>/dev/null | awk '{print $6" "$7" "$8}')" + printf '%s%s%sdownload' \ + "$(h "$base")" "$(h "$size")" "$(h "$mtime")" "$(self_url)" "$key" "$(h "$file")" + done +} + +page() { + local key output_dir include_overlay include_rom include_raw_mtd keep_days + key="$(h "$(param key)")" + output_dir="$(config_get output_dir /tmp)" + include_overlay="$(config_get include_overlay 1)" + include_rom="$(config_get include_rom 0)" + include_raw_mtd="$(config_get include_raw_mtd 0)" + keep_days="$(config_get keep_days 0)" + + http_html + cat < + + + + +OpenWrt Full Backup + + + +
+

OpenWrt Full Backup

+

Direct web panel, no IPK build required. Keep this URL secret.

+
+
+EOF + + if [ -n "$RESULT_FILE" ]; then + printf '

%s

Exit code: %s

' "$(h "$RESULT_TITLE")" "$(h "$RESULT_CODE")"
+		html_escape <"$RESULT_FILE"
+		printf '
' + fi + + cat < +
+

Device

+
+Host: $(h "$(system_value host)") +Release: $(h "$(system_value release)") +Board: $(h "$(system_value board)") +
+
$(df -h 2>/dev/null | html_escape)
+
+ +
+

Create backup

+ + + + + + + + +
+ + + +
+ +
+ +
+

Backups in $(h "$output_dir")

+ +$(backup_rows) +
FileSizeDateAction
+
+ +
+

Inspect archive

+ + + + + +
+ +
+

Restore archive

+ + + + +
+ + + + +
+ + + +
+ +
+

Defaults

+ + + + + + +
+ + + +
+ +
+ +
+

Git install / remove

+

Clone install:

+
git clone $(h "$PROJECT_URL").git
+cd openwrt-full-backup
+sh install.sh
+

One-line install:

+
wget -O - $(h "$RAW_URL")/install.sh | sh
+

Remove:

+
wget -O - $(h "$RAW_URL")/uninstall.sh | sh
+
+ +
+ + +EOF +} + +read_request +if ! authorized; then + http_unauthorized + exit 0 +fi + +if [ "$(param action)" = "download" ]; then + download_file +fi + +if [ "${REQUEST_METHOD:-GET}" = "POST" ]; then + handle_action +fi + +page diff --git a/install.sh b/install.sh new file mode 100644 index 0000000..0ba03ca --- /dev/null +++ b/install.sh @@ -0,0 +1,116 @@ +#!/bin/sh + +set -eu + +RAW_URL="${RAW_URL:-https://raw.githubusercontent.com/kzolotarev95/openwrt-full-backup/main}" +ROOT="${ROOT:-/}" +SCRIPT_DIR="$(CDPATH= cd -- "$(dirname -- "$0")" 2>/dev/null && pwd)" + +info() { + printf '%s\n' "$*" +} + +die() { + printf 'ERROR: %s\n' "$*" >&2 + exit 1 +} + +target_path() { + printf '%s/%s' "${ROOT%/}" "$1" +} + +fetch() { + local src dst + src="$1" + dst="$2" + if command -v wget >/dev/null 2>&1; then + wget -O "$dst" "$src" + elif command -v curl >/dev/null 2>&1; then + curl -fsSL "$src" -o "$dst" + else + die "wget or curl is required for remote install" + fi +} + +install_file() { + local rel mode src dst + rel="$1" + mode="$2" + src="$SCRIPT_DIR/files/$rel" + dst="$(target_path "$rel")" + mkdir -p "$(dirname "$dst")" + if [ -f "$src" ]; then + cp "$src" "$dst" + else + fetch "$RAW_URL/files/$rel" "$dst" + fi + chmod "$mode" "$dst" +} + +install_config() { + local rel src dst + rel="etc/config/fullbackup" + src="$SCRIPT_DIR/files/$rel" + dst="$(target_path "$rel")" + mkdir -p "$(dirname "$dst")" + if [ -f "$dst" ]; then + info "Keeping existing $dst" + return + fi + if [ -f "$src" ]; then + cp "$src" "$dst" + else + fetch "$RAW_URL/files/$rel" "$dst" + fi + chmod 0644 "$dst" +} + +make_key() { + local key_dir key_file key + key_dir="$(target_path etc/owrt-full-backup)" + key_file="$key_dir/web.key" + mkdir -p "$key_dir" + if [ ! -s "$key_file" ]; then + if command -v hexdump >/dev/null 2>&1; then + key="$(dd if=/dev/urandom bs=16 count=1 2>/dev/null | hexdump -v -e '16/1 "%02x"')" + else + key="$(date +%s)-$$" + fi + printf '%s\n' "$key" >"$key_file" + fi + chmod 0600 "$key_file" + cat "$key_file" +} + +router_ip() { + local ip + if command -v uci >/dev/null 2>&1; then + ip="$(uci -q get network.lan.ipaddr 2>/dev/null || true)" + if [ -n "$ip" ]; then + printf '%s\n' "$ip" + return + fi + fi + ip="$(hostname -I 2>/dev/null | awk '{print $1}')" + if [ -n "$ip" ]; then + printf '%s\n' "$ip" + return + fi + printf '192.168.1.1' +} + +install_file "usr/sbin/owrt-full-backup" 0755 +ln -sf owrt-full-backup "$(target_path usr/sbin/owrt-backup)" +install_config +install_file "www/cgi-bin/owrt-full-backup" 0755 + +if [ -x "$(target_path etc/init.d/uhttpd)" ]; then + "$(target_path etc/init.d/uhttpd)" reload >/dev/null 2>&1 || "$(target_path etc/init.d/uhttpd)" restart >/dev/null 2>&1 || true +fi + +key="$(make_key)" +ip="$(router_ip)" + +info "Installed OpenWrt Full Backup web panel." +info "Open: http://$ip/cgi-bin/owrt-full-backup?key=$key" +info "CLI: owrt-full-backup create -o /mnt/usb" diff --git a/package/openwrt-full-backup/Makefile b/package/openwrt-full-backup/Makefile deleted file mode 100644 index 2a47d1b..0000000 --- a/package/openwrt-full-backup/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -include $(TOPDIR)/rules.mk - -PKG_NAME:=openwrt-full-backup -PKG_VERSION:=1.0.0 -PKG_RELEASE:=1 -PKGARCH:=all -PKG_LICENSE:=MIT -PKG_MAINTAINER:=K. Zolotarev - -include $(INCLUDE_DIR)/package.mk - -define Package/openwrt-full-backup - SECTION:=utils - CATEGORY:=Utilities - TITLE:=Full backup and restore helper for OpenWrt -endef - -define Package/openwrt-full-backup/description -Creates a portable backup archive with sysupgrade config backup, installed -package list, OpenWrt metadata, optional overlay snapshot, optional ROM rootfs -snapshot, optional firmware image copy, and optional raw MTD dumps. Includes -guarded restore helpers for OpenWrt 22.x through 25.x. -endef - -define Build/Compile -endef - -define Package/openwrt-full-backup/install - $(INSTALL_DIR) $(1)/usr/sbin - $(INSTALL_BIN) ./files/usr/sbin/owrt-full-backup $(1)/usr/sbin/owrt-full-backup - $(LN) owrt-full-backup $(1)/usr/sbin/owrt-backup - $(INSTALL_DIR) $(1)/etc/config - $(INSTALL_CONF) ./files/etc/config/fullbackup $(1)/etc/config/fullbackup -endef - -$(eval $(call BuildPackage,openwrt-full-backup)) diff --git a/uninstall.sh b/uninstall.sh new file mode 100644 index 0000000..c4fcc3e --- /dev/null +++ b/uninstall.sh @@ -0,0 +1,33 @@ +#!/bin/sh + +set -eu + +ROOT="${ROOT:-/}" +PURGE="${PURGE:-0}" + +target_path() { + printf '%s/%s' "${ROOT%/}" "$1" +} + +rmf() { + rm -f "$(target_path "$1")" +} + +rmf usr/sbin/owrt-full-backup +rmf usr/sbin/owrt-backup +rmf www/cgi-bin/owrt-full-backup + +if [ "$PURGE" = "1" ]; then + rmf etc/config/fullbackup + rmf etc/owrt-full-backup/web.key + rmdir "$(target_path etc/owrt-full-backup)" 2>/dev/null || true +fi + +if [ -x "$(target_path etc/init.d/uhttpd)" ]; then + "$(target_path etc/init.d/uhttpd)" reload >/dev/null 2>&1 || "$(target_path etc/init.d/uhttpd)" restart >/dev/null 2>&1 || true +fi + +printf '%s\n' "Removed OpenWrt Full Backup web panel." +if [ "$PURGE" != "1" ]; then + printf '%s\n' "Config and web key were kept. Run with PURGE=1 to remove them." +fi