Files
dawnline/uninstall.sh
T
Aemeath ac90575b0b
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / Backend (Go: vet, tests, a real ubusd and uhttpd) (push) Blocked by required conditions
CI / Package files (push) Blocked by required conditions
Dawnline 0.20.0
- **Backend rewritten in Go.** One daemon, `dawnlined`, replaces the whole ucode backend: the rpcd plugin, the agent, the CLI and the updater. The package no longer depends on ucode.
- **Per-architecture builds.** The release carries the backend for arm64, ARMv7, mips, mipsle and amd64; the router fetches its own after the package is installed and checks its sha256. Dawnline does not run on other architectures (older ARM, 32-bit x86, RISC-V).
- **Faster on the router.** A firewall sync takes 0.06 s instead of 0.9 s; a full apply takes about 300 ms. The portal is served by the daemon itself, without a CGI process per request.
- **Live pages.** The admin and the portal follow a live stream from the router instead of re-fetching the whole state every 30 seconds.
- **Admin redesigned in the portal's style.** Three sections (Overview · Log · Settings); a server is a page of its own with People, Places and Settings; a device opens as a dialog over its person.
- **Changes wait for «Apply».** Every setting, and a person's access, is staged in one dock before it reaches the router.
- **Configuration rollout.** After a change that makes devices fetch their configuration again, the admin shows how many have fetched it and who has not. Every setting shows beforehand (⟳N) how many devices it will touch.
- **Waiting for a decision.** Overview and People put first the people who need one (access ended, limit reached, a device that does not connect), each with its one action a tap away.
- **Bulk actions on people.** «Select» (or a long press on a card) picks several people to extend by a month, pause or resume at once.
- **Undo.** An action done from a card or a request is undone from its toast.
- **Update dialogs redesigned.** An update is one view from its question to its result; Dawnline's own update runs in it like every other, and the page reloads itself once the new version answers. Other versions are a list, each with its notes and Install on a page of its own.
- **Site to site: networks behind a router.** A router connected as a device can have networks behind it (up to eight, /16 to /30): the server routes them and applies the router's access to them. A network that shares addresses with a tunnel, the router's own networks or another site is refused by name.
- **Routers from the portal.** People can add a router and name its networks on their own page; the admin accepts or declines with a reason, or lets them through without asking.
- **Check access and Health know the networks behind routers.**
- **Usage limits reworked.** A monthly limit no longer follows the calendar. A person's month starts with their first traffic and ends a month later; the next one starts only when they connect again, so time away uses up none of it. Before, everyone's limit reset on the 1st.
- Extra data lasts until that person's month ends; «Reset usage» starts the month anew.
- A limit is for a month or for the whole term; the admin and the portal show when it resets.
- Charts that said «this month» show the last 30 days.
- After the update nobody loses what was counted: the month that was running becomes the person's first and ends on the 1st.
- **Access by time of day removed.** The Hours limit is gone from the admin, the portal and the backend; saved hours are dropped.
- **Expiry simplified.** An end date always stops access, with a heads-up three days before; the per-person choice is gone.
- **No false disconnects from sleeping phones.** A phone or a tablet stays online through ten minutes of silence.
- **Mobile Safari fixes.** Pressing a control no longer sends the page to its top; tab tracks that do not fit scroll; switches animate after a press.
2026-11-13 09:43:50 +03:00

787 lines
23 KiB
Bash
Executable File

#!/bin/sh
# shellcheck shell=dash
#
# Dawnline uninstaller for OpenWrt.
#
# sh -c "$(wget -qO- https://raw.githubusercontent.com/tickcount/luci-app-dawnline/main/uninstall.sh)"
#
# Backs up the configuration, runs Dawnline's own removal (the same as
# Settings → Remove Dawnline from this router: tunnels, firewall rules, portal,
# routing and the home-like link go away), removes the package and cleans what
# is left. AmneziaWG stays unless --remove-awg is given. `--help` lists the
# options.
UNINSTALLER_VERSION="1.0.0"
PKG_NAME="luci-app-dawnline"
# Removal order: LuCI pieces first, the kernel module last.
AWG_PKGS="luci-i18n-amneziawg-ru luci-proto-amneziawg amneziawg-tools kmod-amneziawg"
LOG_FILE="/tmp/dawnline-uninstall.log"
LOCK_DIR="/tmp/dawnline.install.lock.d"
DATA_DIR="/etc/dawnline"
BACKUP_DIR="$DATA_DIR/backups"
ASSUME_YES=0
PURGE=0
REMOVE_AWG=0
DRY_RUN=0
VERBOSE=0
LOG_READY=0
LOCK_HELD=0
TMP_DIR=""
PKG_MANAGER=""
PKG_IS_APK=0
STEP=0
STEPS=6
BACKUP_PATH=""
FAILED=0
_STREAM_PID=""
_STREAM_STOP=""
ESC="$(printf '\033')"
if [ -t 1 ] 2>/dev/null && [ "${TERM:-dumb}" != "dumb" ]; then
C_RESET="${ESC}[0m"
C_BOLD="${ESC}[1m"
C_RED="${ESC}[31;1m"
C_GREEN="${ESC}[32;1m"
C_YELLOW="${ESC}[33;1m"
C_CYAN="${ESC}[36;1m"
else
C_RESET=""
C_BOLD=""
C_RED=""
C_GREEN=""
C_YELLOW=""
C_CYAN=""
fi
START_TS="$(date +%s 2>/dev/null || echo 0)"
# ---------- output ----------
ts_elapsed() {
_now="$(date +%s 2>/dev/null || echo "$START_TS")"
_el=$((_now - START_TS))
[ "$_el" -ge 0 ] 2>/dev/null || _el=0
printf '+%02d:%02d' $((_el / 60)) $((_el % 60))
}
log_line() {
[ "$LOG_READY" -eq 1 ] || return 0
printf '[%s %s] %s\n' "$(date '+%Y-%m-%d %H:%M:%S' 2>/dev/null)" "$(ts_elapsed)" "$1" >>"$LOG_FILE" 2>/dev/null || true
}
msg() {
log_line "INFO $1"
printf ' [%s] %s%s%s\n' "$(ts_elapsed)" "$C_CYAN" "$1" "$C_RESET"
}
ok() {
log_line "OK $1"
printf ' [%s] %s%s✓%s %s\n' "$(ts_elapsed)" "$C_GREEN" "$C_BOLD" "$C_RESET" "$1"
}
warn() {
log_line "WARN $1"
printf ' [%s] %s%s⚠%s %s\n' "$(ts_elapsed)" "$C_YELLOW" "$C_BOLD" "$C_RESET" "$1" >&2
}
err() {
log_line "ERROR $1"
printf ' [%s] %s%s✗%s %s\n' "$(ts_elapsed)" "$C_RED" "$C_BOLD" "$C_RESET" "$1" >&2
}
debug() {
log_line "DEBUG $1"
[ "$VERBOSE" -eq 1 ] || return 0
printf ' [%s] [debug] %s\n' "$(ts_elapsed)" "$1" >&2
}
dry() {
msg "[dry-run] would $1"
}
step() {
STEP=$((STEP + 1))
log_line "STEP [$STEP/$STEPS] $1"
printf ' [%s] %s[%s/%s] %s%s\n' "$(ts_elapsed)" "$C_BOLD" "$STEP" "$STEPS" "$1" "$C_RESET"
}
fail() {
err "$1"
[ "$LOG_READY" -eq 1 ] && err "Uninstaller log: $LOG_FILE"
exit 1
}
usage() {
cat <<EOF
Dawnline Uninstaller v${UNINSTALLER_VERSION}
Usage: sh uninstall.sh [options]
-y, --yes Do not ask for confirmation
-p, --purge Also delete the configuration, keys, history and every
backup (/etc/config/dawnline, /etc/dawnline). No backup is made.
--keep-awg Keep AmneziaWG (the default: other tunnels may use it)
--remove-awg Also remove AmneziaWG, unless another interface still uses it
-n, --dry-run Show what would be removed; change nothing
-v, --verbose Print diagnostics
--version Print the uninstaller version
-h, --help Show this help
Without --purge a backup of the configuration is kept in $BACKUP_DIR:
after installing Dawnline again, restore it in Dawnline → Settings → Backups.
Log: $LOG_FILE
EOF
}
parse_args() {
while [ "$#" -gt 0 ]; do
case "$1" in
-y | --yes) ASSUME_YES=1 ;;
-p | --purge) PURGE=1 ;;
--keep-awg) REMOVE_AWG=0 ;;
--remove-awg) REMOVE_AWG=1 ;;
-n | --dry-run) DRY_RUN=1 ;;
-v | --verbose) VERBOSE=1 ;;
--version)
printf 'dawnline-uninstaller %s\n' "$UNINSTALLER_VERSION"
exit 0
;;
-h | --help)
usage
exit 0
;;
*)
err "Unknown option: $1 (see --help)"
return 2
;;
esac
shift
done
return 0
}
# ---------- process plumbing ----------
command_exists() { command -v "$1" >/dev/null 2>&1; }
acquire_lock() {
if mkdir "$LOCK_DIR" 2>/dev/null; then
echo "$$" >"$LOCK_DIR/pid"
LOCK_HELD=1
return 0
fi
_old="$(cat "$LOCK_DIR/pid" 2>/dev/null)"
if [ -n "$_old" ] && kill -0 "$_old" 2>/dev/null; then
err "Another Dawnline installer or uninstaller is running (pid $_old)"
return 1
fi
warn "Removing a stale installer lock${_old:+ (pid $_old)}"
rm -rf "$LOCK_DIR" 2>/dev/null
mkdir "$LOCK_DIR" 2>/dev/null || {
err "Cannot create the lock $LOCK_DIR"
return 1
}
echo "$$" >"$LOCK_DIR/pid"
LOCK_HELD=1
}
release_lock() {
[ "$LOCK_HELD" -eq 1 ] || return 0
[ "$(cat "$LOCK_DIR/pid" 2>/dev/null)" = "$$" ] && rm -rf "$LOCK_DIR" 2>/dev/null
LOCK_HELD=0
}
_NL='
'
_stream_poll() {
_ssize="$(wc -c <"$_sf" 2>/dev/null | tr -d " ")"
case "$_ssize" in '' | *[!0-9]*) _ssize=0 ;; esac
[ "$_ssize" -gt "$_spos" ] || return 0
_sbuf="$_sbuf$(tail -c +$((_spos + 1)) "$_sf" 2>/dev/null)$_NL"
_spos="$_ssize"
case "$(tail -c 1 "$_sf" 2>/dev/null)" in
'') ;;
*) _sbuf="${_sbuf%"$_NL"}" ;;
esac
while :; do
case "$_sbuf" in
*"$_NL"*) ;;
*) break ;;
esac
_sline="${_sbuf%%"$_NL"*}"
_sbuf="${_sbuf#*"$_NL"}"
[ -n "$_sline" ] && printf ' [%s] [%s] %s\n' "$(ts_elapsed)" "$_stag" "$_sline"
done
return 0
}
_stream_loop() {
_sf="$1"
_stag="$2"
_sstop="$3"
_sparent="$4"
_spos=0
_sbuf=""
_sidle=0
while :; do
[ -e "$_sstop" ] && break
kill -0 "$_sparent" 2>/dev/null || break
_spre="$_spos"
_stream_poll
if [ "$_spos" -eq "$_spre" ]; then
_sidle=$((_sidle + 1))
[ $((_sidle % 10)) -eq 0 ] && printf ' [%s] [%s] … still running (%ss)\n' "$(ts_elapsed)" "$_stag" "$_sidle"
else
_sidle=0
fi
sleep 1
done
_stream_poll
[ -n "$_sbuf" ] && printf ' [%s] [%s] %s\n' "$(ts_elapsed)" "$_stag" "$_sbuf"
return 0
}
stream_stop() {
[ -n "$_STREAM_PID" ] || return 0
: >"$_STREAM_STOP" 2>/dev/null
wait "$_STREAM_PID" 2>/dev/null
_STREAM_PID=""
rm -f "$_STREAM_STOP" 2>/dev/null
return 0
}
# run_logged TAG COMMAND...: foreground, output streamed and kept in the log.
run_logged() {
_tag="$1"
shift
_out="$TMP_DIR/cmd.$$.out"
log_line "EXEC [$_tag] $*"
: >"$_out"
_STREAM_STOP="$_out.stop"
rm -f "$_STREAM_STOP"
_stream_loop "$_out" "$_tag" "$_STREAM_STOP" "$$" &
_STREAM_PID=$!
"$@" >"$_out" 2>&1 </dev/null
_rc=$?
stream_stop
if [ -s "$_out" ]; then
while IFS= read -r _line || [ -n "$_line" ]; do
log_line " [$_tag] $_line"
done <"$_out"
fi
log_line "EXIT [$_tag] $_rc"
cp "$_out" "$TMP_DIR/last.out" 2>/dev/null
rm -f "$_out"
return "$_rc"
}
# act DESCRIPTION TAG COMMAND...: run, or only say it in a dry run.
act() {
_desc="$1"
shift
if [ "$DRY_RUN" -eq 1 ]; then
dry "$_desc"
return 0
fi
debug "$_desc"
run_logged "$@"
}
# ---------- packages ----------
detect_package_manager() {
if command_exists apk; then
PKG_MANAGER="apk"
PKG_IS_APK=1
elif command_exists opkg; then
PKG_MANAGER="opkg"
PKG_IS_APK=0
else
err "Neither apk nor opkg is available"
return 1
fi
}
pkg_is_installed() {
if [ "$PKG_IS_APK" -eq 1 ]; then
apk info -e "$1" >/dev/null 2>&1
else
opkg status "$1" 2>/dev/null | grep -q '^Status: .* installed'
fi
}
installed_dawnline_pkgs() {
_l=""
pkg_is_installed "$PKG_NAME" && _l="$PKG_NAME"
if [ "$PKG_IS_APK" -eq 1 ]; then
_i18n="$(apk info 2>/dev/null | grep '^luci-i18n-dawnline-')"
else
_i18n="$(opkg list-installed 'luci-i18n-dawnline-*' 2>/dev/null | awk '{ print $1 }')"
fi
# Translations first: they depend on the app.
for _p in $_i18n; do _l="$_p $_l"; done
printf '%s' "$_l"
}
pkg_remove() {
_tag="$1"
shift
if [ "$PKG_IS_APK" -eq 1 ]; then
act "apk del $*" "$_tag" apk del "$@"
else
_w=0
while pidof opkg >/dev/null 2>&1 && [ "$_w" -lt 30 ]; do
_w=$((_w + 1))
sleep 1
done
act "opkg remove $*" "$_tag" opkg remove "$@"
fi
}
# ---------- steps ----------
dawnline_present() {
pkg_is_installed "$PKG_NAME" || [ -e /usr/bin/dawnline ] || [ -e /etc/init.d/dawnline ] ||
[ -e /etc/config/dawnline ] || [ -d "$DATA_DIR" ]
}
confirm() {
[ "$ASSUME_YES" -eq 0 ] && [ "$DRY_RUN" -eq 0 ] && [ -t 0 ] || return 0
printf ' This removes %sDawnline%s from the router: everyone is disconnected, and its\n' "$C_BOLD" "$C_RESET"
printf ' tunnels, firewall rules, portal and the %s package are removed.\n' "$PKG_NAME"
if [ "$PURGE" -eq 1 ]; then
printf ' %s--purge: the configuration, keys, history and every backup are deleted too.%s\n' "$C_RED" "$C_RESET"
printf ' %sThis cannot be undone.%s\n' "$C_RED" "$C_RESET"
else
printf ' A backup of the configuration is kept in %s.\n' "$BACKUP_DIR"
fi
if [ "$REMOVE_AWG" -eq 1 ]; then
printf ' AmneziaWG is removed too, unless another interface still uses it.\n'
else
printf ' AmneziaWG stays installed (other tunnels may use it; --remove-awg removes it).\n'
fi
printf '\n Remove Dawnline? [y/N] '
read -r _answer || _answer=""
case "$_answer" in
y | Y | yes | Yes | YES) ;;
*)
msg "Cancelled: nothing was changed"
exit 0
;;
esac
}
# An update (by hand or automatic) may be in the middle of opkg/apk: let it
# finish rather than tear the package out from under it. The updater holds
# UPDATE_LOCK for a whole job; once this script has it, no automatic update
# can start until the removal is over.
UPDATE_JOB=/var/run/dawnline/update-job.json
UPDATE_LOCK=/var/run/dawnline/update.lock
update_running() {
if command_exists flock && [ -e "$UPDATE_LOCK" ]; then
exec 8>>"$UPDATE_LOCK"
flock -n 8 && return 1
return 0
fi
[ -f "$UPDATE_JOB" ] || return 1
grep -q '"state": *"running"' "$UPDATE_JOB" 2>/dev/null || return 1
_pid="$(sed -n 's/.*"pid": *\([0-9][0-9]*\).*/\1/p' "$UPDATE_JOB" | head -n 1)"
[ -n "$_pid" ] && [ -d "/proc/$_pid" ]
}
wait_for_update() {
update_running || return 0
if [ "$DRY_RUN" -eq 1 ]; then
warn "An update is running: the removal would wait for it to finish"
return 0
fi
msg "An update is running: waiting for it to finish (up to 5 min)"
_w=0
while update_running; do
[ "$_w" -ge 300 ] && fail "The update is still running after 5 min. Nothing was removed; try again when it finishes"
sleep 5
_w=$((_w + 5))
[ $((_w % 30)) -eq 0 ] && msg "… still updating (${_w}s)"
done
ok "The update finished"
}
do_backup() {
step "Backing up the configuration"
if [ "$PURGE" -eq 1 ]; then
warn "--purge: no backup is made"
return 0
fi
if [ ! -f /etc/config/dawnline ]; then
ok "No /etc/config/dawnline: nothing to back up"
return 0
fi
if [ "$DRY_RUN" -eq 1 ]; then
dry "save /etc/config/dawnline and Dawnline's data to $BACKUP_DIR"
return 0
fi
_bn=""
if [ -x /usr/bin/dawnline ]; then
_bn="$(/usr/bin/dawnline backup --reason pre-remove 2>>"$LOG_FILE")"
[ -n "$_bn" ] && [ -f "$BACKUP_DIR/$_bn" ] || _bn=""
[ -n "$_bn" ] || warn "dawnline backup failed; saving the files directly"
fi
if [ -z "$_bn" ]; then
# The same archive format Dawnline makes, so Settings → Backups can restore it.
_bn="dawnline-$(date +%Y%m%d-%H%M%S)-pre-remove.tar.gz"
set -- etc/config/dawnline
for _f in usage.json events.json; do
[ -f "$DATA_DIR/$_f" ] && set -- "$@" "${DATA_DIR#/}/$_f"
done
mkdir -p "$BACKUP_DIR" && chmod 700 "$DATA_DIR" "$BACKUP_DIR" 2>/dev/null
tar -czf "$BACKUP_DIR/$_bn" -C / "$@" 2>>"$LOG_FILE" || {
rm -f "$BACKUP_DIR/$_bn"
fail "The backup failed and nothing was removed (--purge removes without a backup)"
}
fi
chmod 600 "$BACKUP_DIR/$_bn" 2>/dev/null
BACKUP_PATH="$BACKUP_DIR/$_bn"
ok "Backup: $BACKUP_PATH"
}
do_teardown() {
step "Running Dawnline's own removal"
# The same call as Settings → Remove Dawnline from this router. The backend's own object stops the
# service itself, last; a version from before it answers through rpcd, with the service stopped first
# (so no automatic update can slip in between).
for _obj in dawnline luci.dawnline; do
ubus list "$_obj" >/dev/null 2>&1 || continue
ubus -v list "$_obj" 2>/dev/null | grep -q '"uninstall"' || continue
if [ "$_obj" = luci.dawnline ] && [ "$DRY_RUN" -ne 1 ]; then
/etc/init.d/dawnline stop >/dev/null 2>&1
fi
# The removal takes the update lock itself: hand it over.
exec 8>&- 2>/dev/null
if act "call $_obj uninstall (Settings → Remove Dawnline)" rpc \
ubus -t 120 call "$_obj" uninstall '{"confirm":"remove"}'; then
[ "$DRY_RUN" -eq 1 ] && return 0
if grep -q '"ok": *true' "$TMP_DIR/last.out" 2>/dev/null; then
# the backend stops the service a moment after it answers
[ "$_obj" = dawnline ] && sleep 3 && /etc/init.d/dawnline stop >/dev/null 2>&1
ok "Tunnels, firewall rules, portal and routing removed; service stopped"
return 0
fi
fi
warn "$_obj uninstall failed: $(sed -n 's/.*"error": *"\(.*\)".*/\1/p' "$TMP_DIR/last.out" 2>/dev/null | head -n 1)"
done
if [ -x /usr/bin/dawnline ]; then
act "stop the Dawnline service" stop /etc/init.d/dawnline stop
if act "run 'dawnline teardown'" teardown /usr/bin/dawnline teardown; then
ok "dawnline teardown removed what Dawnline created"
else
warn "dawnline teardown failed: leftovers are cleaned in step 5"
fi
act "disable the Dawnline service" disable /etc/init.d/dawnline disable
return 0
fi
if [ -x /etc/init.d/dawnline ]; then
act "stop and disable the Dawnline service" stop sh -c '/etc/init.d/dawnline stop; /etc/init.d/dawnline disable'
fi
warn "/usr/bin/dawnline is missing: leftovers are cleaned in step 5"
}
do_remove_package() {
step "Removing the package"
_pkgs="$(installed_dawnline_pkgs)"
if [ -z "$_pkgs" ]; then
ok "$PKG_NAME is not installed"
return 0
fi
# shellcheck disable=SC2086
pkg_remove pkg $_pkgs
if [ "$DRY_RUN" -eq 0 ] && pkg_is_installed "$PKG_NAME"; then
err "$PKG_MANAGER could not remove $PKG_NAME (see $LOG_FILE)"
FAILED=1
return 0
fi
[ "$DRY_RUN" -eq 1 ] || ok "Removed: $_pkgs"
}
do_awg() {
step "AmneziaWG"
_have=""
for _p in $AWG_PKGS; do
pkg_is_installed "$_p" && _have="$_have $_p"
done
_have="${_have# }"
if [ -z "$_have" ]; then
ok "AmneziaWG is not installed"
return 0
fi
if [ "$REMOVE_AWG" -eq 0 ]; then
ok "AmneziaWG kept (other tunnels may use it; --remove-awg removes it)"
return 0
fi
# AmneziaWG interfaces that are not Dawnline's (tagged _dawnline).
_users=""
for _i in $(uci -q show network 2>/dev/null | sed -n "s/^network\.\([^.]*\)\.proto='amneziawg'$/\1/p"); do
[ -n "$(uci -q get "network.$_i._dawnline")" ] || _users="$_users $_i"
done
if [ -n "$_users" ]; then
warn "AmneziaWG kept: still used by interface(s)$_users"
return 0
fi
# shellcheck disable=SC2086
pkg_remove awg $_have
if [ "$DRY_RUN" -eq 0 ]; then
if pkg_is_installed kmod-amneziawg || pkg_is_installed amneziawg-tools; then
warn "AmneziaWG could not be removed completely (see $LOG_FILE)"
else
ok "AmneziaWG removed"
fi
fi
}
# Only objects Dawnline names as its own (see "What Dawnline changes" in the
# README); normally `dawnline teardown` has removed all of them already.
clean_network_leftovers() {
_ifs="$(uci -q show network 2>/dev/null | sed -n "s/^network\.\([^.]*\)\._dawnline=.*/\1/p")"
_fw="$(uci -q show firewall 2>/dev/null | sed -n 's/^firewall\.\(dawnline[A-Za-z0-9_]*\)=.*/\1/p')"
_found=0
if [ -n "$_ifs" ]; then
_found=1
for _i in $_ifs; do
if [ "$DRY_RUN" -eq 1 ]; then
dry "delete network interface $_i"
else
ifdown "$_i" >/dev/null 2>&1
uci -q delete "network.$_i"
fi
done
[ "$DRY_RUN" -eq 1 ] || {
uci -q commit network
ubus call network reload >/dev/null 2>&1
}
[ "$DRY_RUN" -eq 1 ] || ok "Removed leftover tunnel interfaces: $(echo "$_ifs" | tr '\n' ' ')"
fi
if [ -n "$_fw" ]; then
_found=1
if [ "$DRY_RUN" -eq 1 ]; then
dry "delete firewall sections: $(echo "$_fw" | tr '\n' ' ')"
else
for _s in $_fw; do uci -q delete "firewall.$_s"; done
uci -q commit firewall
/etc/init.d/firewall reload >/dev/null 2>&1
ok "Removed leftover firewall sections: $(echo "$_fw" | tr '\n' ' ')"
fi
fi
for _t in dawnline dawnline_reply; do
command_exists nft && nft list table inet "$_t" >/dev/null 2>&1 || continue
_found=1
if [ "$DRY_RUN" -eq 1 ]; then
dry "delete the nft table inet $_t"
else
nft delete table inet "$_t" 2>/dev/null
ok "Removed the nft table inet $_t"
fi
done
if [ -e /var/run/netns/dawnline ] || ip link show dlx0 >/dev/null 2>&1 || ip link show dll0 >/dev/null 2>&1; then
_found=1
if [ "$DRY_RUN" -eq 1 ]; then
dry "delete the dawnline network namespace and its veth links"
else
ip link del dlx0 >/dev/null 2>&1
ip link del dll0 >/dev/null 2>&1
ip netns del dawnline >/dev/null 2>&1 || rm -f /var/run/netns/dawnline
ok "Removed the dawnline network namespace (policy rules left behind go away on reboot)"
fi
fi
clean_routing_leftovers "$_ifs" && _found=1
[ "$_found" -eq 1 ] || ok "No tunnel, firewall, nft or routing leftovers"
}
# Dawnline's policy rules: priority 90 sent the portal's and the tunnels'
# answers by the main table (up to 0.4.0); 5200-5299 are the "like a home
# device" loop for a tunnel interface (Dawnline's, or one already gone), with
# tables 2077-2176.
clean_routing_leftovers() {
_ours=" $(echo "$1" | tr '\n' ' ') "
_rules=""
for _fam in -4 -6; do
_r="$(ip "$_fam" rule show 2>/dev/null | awk -v fam="$_fam" -v ours="$_ours" '
{ pr = $1; sub(/:$/, "", pr); pr += 0; line = $0; sub(/^[0-9]+:[ \t]*/, "", line) }
pr == 90 && line ~ /ipproto (tcp|udp) sport [0-9]+ lookup main/ { print fam "|" pr "|" line; next }
pr >= 5200 && pr < 5300 && fam == "-4" && match(line, /iif [^ ]+/) {
dev = substr(line, RSTART + 4, RLENGTH - 4)
if (line ~ /\[detached\]/ || index(ours, " " dev " ")) print fam "|" pr "|" line
}')"
[ -n "$_r" ] && _rules="$_rules$_r
"
done
_rules="$(printf '%s' "$_rules" | sed '/^$/d')"
[ -n "$_rules" ] || return 1
_tables="$(printf '%s\n' "$_rules" | awk '{ t = $NF + 0; if ($(NF - 1) == "lookup" && t >= 2077 && t < 2177) print t }' | sort -u)"
if [ "$DRY_RUN" -eq 1 ]; then
printf '%s\n' "$_rules" | while IFS='|' read -r _f _p _l; do dry "delete ip $_f rule $_p: $_l"; done
for _t in $_tables; do dry "flush route table $_t"; done
return 0
fi
printf '%s\n' "$_rules" | while IFS='|' read -r _f _p _l; do
# "from all" and "[detached]" are how ip prints a rule, not how it takes one.
_spec="$(echo "$_l" | sed -e 's/^from all //' -e 's/ \[detached\]//')"
# shellcheck disable=SC2086 # the rule spec is words for ip
ip "$_f" rule del priority "$_p" $_spec 2>/dev/null
done
for _t in $_tables; do ip -4 route flush table "$_t" 2>/dev/null; done
ok "Removed $(printf '%s\n' "$_rules" | wc -l | tr -d ' ') leftover routing rule(s)"
return 0
}
do_leftovers() {
step "Cleaning up leftovers"
clean_network_leftovers
if grep -qs '/usr/libexec/dawnline/' /etc/crontabs/root; then
if [ "$DRY_RUN" -eq 1 ]; then
dry "remove Dawnline lines from /etc/crontabs/root"
else
sed -i '\#/usr/libexec/dawnline/#d' /etc/crontabs/root
/etc/init.d/cron restart >/dev/null 2>&1
ok "Removed the heartbeat cron job"
fi
fi
set -- /var/run/dawnline /var/run/dawnline-dns.pid /var/etc/dawnline-dns.conf \
/var/etc/dawnline-dns.resolv /var/etc/dawnline-ns.nft /tmp/hosts/dawnline /tmp/dawnline-update \
/www/cgi-bin/dawnline-portal
# The package's own files, only once the package manager has let go of them.
if ! pkg_is_installed "$PKG_NAME"; then
set -- "$@" /usr/bin/dawnline /usr/libexec/dawnline /usr/share/dawnline /usr/share/ucode/dawnline \
/etc/init.d/dawnline /etc/hotplug.d/iface/95-dawnline /etc/uci-defaults/90_dawnline \
/usr/share/rpcd/ucode/luci.dawnline /usr/share/rpcd/acl.d/luci-app-dawnline.json \
/usr/share/luci/menu.d/luci-app-dawnline.json /www/luci-static/resources/dawnline \
/www/luci-static/resources/view/dawnline
for _r in /etc/rc.d/*dawnline; do [ -e "$_r" ] && set -- "$@" "$_r"; done
# The translations' catalogs (luci-i18n-dawnline-<lang> depends on the package, so it is gone too).
for _r in /usr/lib/lua/luci/i18n/dawnline.*.lmo; do [ -e "$_r" ] && set -- "$@" "$_r"; done
fi
if [ "$PURGE" -eq 1 ]; then
set -- "$@" "$DATA_DIR" /etc/config/dawnline /etc/config/dawnline-opkg /etc/config/dawnline.apk-new
fi
_gone=""
for _p in "$@"; do
[ -e "$_p" ] || [ -L "$_p" ] || continue
_gone="$_gone $_p"
if [ "$DRY_RUN" -eq 1 ]; then
dry "delete $_p"
else
rm -rf "$_p"
fi
done
if [ -n "$_gone" ] && [ "$DRY_RUN" -eq 0 ]; then
log_line "INFO deleted:$_gone"
case "$_gone" in *"/tmp/hosts/dawnline"*) killall -HUP dnsmasq 2>/dev/null ;; esac
ok "Removed leftover files ($(echo "$_gone" | wc -w | tr -d ' '))"
elif [ -z "$_gone" ]; then
ok "No leftover files"
fi
if [ "$PURGE" -eq 1 ] && [ "$DRY_RUN" -eq 0 ]; then
ok "Configuration, keys, history and backups deleted (--purge)"
elif [ "$PURGE" -eq 0 ]; then
_kept=""
[ -f /etc/config/dawnline ] && _kept="/etc/config/dawnline"
[ -d "$DATA_DIR" ] && _kept="${_kept:+$_kept and }$DATA_DIR (backups, history)"
[ -z "$_kept" ] || ok "Kept: $_kept"
fi
if [ "$DRY_RUN" -eq 1 ]; then
dry "clear the LuCI caches"
else
rm -f /tmp/luci-indexcache* /var/luci-indexcache* /tmp/luci-modulecache/* 2>/dev/null
ok "LuCI caches cleared"
fi
}
do_reload_luci() {
step "Reloading LuCI"
_done=""
for _svc in rpcd uhttpd; do
[ -x "/etc/init.d/$_svc" ] || continue
act "restart $_svc" "$_svc" "/etc/init.d/$_svc" restart && _done="${_done:+$_done and }$_svc"
done
[ "$DRY_RUN" -eq 1 ] || [ -z "$_done" ] || ok "Restarted $_done (log in to LuCI again if asked)"
return 0
}
cleanup() {
trap '' HUP INT TERM
stream_stop
[ -n "$TMP_DIR" ] && rm -rf "$TMP_DIR" 2>/dev/null
release_lock
}
on_hup() { exit 129; }
on_int() { exit 130; }
on_term() { exit 143; }
on_pipe() {
trap '' PIPE
exit 141
}
main() {
trap cleanup EXIT
trap on_hup HUP
trap on_int INT
trap on_term TERM
trap on_pipe PIPE
parse_args "$@" || exit 2
[ "$(id -u 2>/dev/null || echo 1)" = 0 ] || fail "Run the uninstaller as root"
acquire_lock || exit 1
: >"$LOG_FILE" 2>/dev/null && chmod 600 "$LOG_FILE" 2>/dev/null && LOG_READY=1
log_line "INFO Dawnline Uninstaller $UNINSTALLER_VERSION: $0 $*"
TMP_DIR="$(mktemp -d /tmp/dawnline-uninstaller.XXXXXX 2>/dev/null)" || TMP_DIR=""
[ -n "$TMP_DIR" ] || {
TMP_DIR="/tmp/dawnline-uninstaller.$$"
mkdir -p "$TMP_DIR" || fail "Cannot create a temporary directory in /tmp"
}
detect_package_manager || fail "No supported package manager"
printf '\n %s%sDawnline Uninstaller%s v%s\n' "$C_CYAN" "$C_BOLD" "$C_RESET" "$UNINSTALLER_VERSION"
printf ' Removes Dawnline and everything it set up; AmneziaWG stays unless asked\n\n'
[ "$DRY_RUN" -eq 1 ] && msg "Dry run: nothing on the router is changed"
if ! dawnline_present; then
ok "Dawnline is not installed: nothing to do"
return 0
fi
confirm
wait_for_update
# Once started, an SSH drop must not leave the removal half done.
trap '' HUP
do_backup
do_teardown
do_remove_package
do_awg
do_leftovers
do_reload_luci
_took=$(($(date +%s 2>/dev/null || echo "$START_TS") - START_TS))
if [ "$DRY_RUN" -eq 1 ]; then
ok "Dry run finished in ${_took}s: nothing was changed"
msg "Log: $LOG_FILE"
return 0
fi
if [ "$FAILED" -eq 1 ]; then
err "Dawnline was not removed completely in ${_took}s"
else
ok "Dawnline removed in ${_took}s"
fi
[ -n "$BACKUP_PATH" ] && msg "Backup: $BACKUP_PATH (restore it in Dawnline → Settings → Backups after reinstalling)"
msg "Log: $LOG_FILE"
[ "$FAILED" -eq 0 ] || exit 1
}
main "$@"