Files
dawnline/web/src/admin/events/log-templates.ts
T
Aemeath dc0f159447
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / ucode static checks (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 24.10) (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 25.12) (push) Blocked by required conditions
Dawnline 0.14.0
- A device is renamed where its name stands on its card: a click on the
  name, Return or Space on it, or Rename in the ⋯ menu turns it into a
  field with the name selected. Return saves, and the words shimmer until
  the router answers. Esc or a click elsewhere puts the old name back. The
  rename window is gone, and the page no longer redraws under a name being
  edited
- Device names take up to 20 characters: letters of any language, digits,
  spaces and - _ . The router refuses anything else when a device is added
  or renamed, so a name can't carry symbols into configurations, file
  names or the AmneziaVPN key. The portal and the admin turn a character
  like that away as it is typed: the field shakes, its outline goes red
  and a short line says why. Suggested names (a phone's model, "Phone 2")
  are stripped of such characters and cut to fit. Names set before this
  stay as they are
- LAN Bypass: Add a device, in the portal and in the admin, has a switch
  that keeps the device's own local network (printer, TV, NAS) reachable
  while it is connected. It is off by default and stays as chosen; the
  admin's device drawer shows it. With home and internet access the switch
  says which addresses still lead to the home network
- Health warns when a server's home network is on one of the subnets home
  routers come with (192.168.0.x, 192.168.1.x and others). People with
  home access who connect from a network on the same addresses reach your
  home instead of their own, LAN Bypass or not
- The router tells when a device can't connect properly. After the problem
  lasts three minutes, the portal card and the admin drawer name it:
  can't finish connecting (the network may block it), connected but no
  data (an outdated configuration, and the card offers Reconnect), on two
  devices at once, or a connection that keeps dropping. Activity lists
  these under Problems, one line per device per hour, and says when the
  device connects normally again
- The set-up sheet's connection line follows what the device does:
  waiting, can't finish, connected, or connected but no data. The sheet
  closes by itself only once data comes through. On the device itself and
  for a router, the steps regroup to what fixes the problem: "Set it up
  again" when the handshake never finishes, "Add the connection again"
  ("Import the configuration again" for a router) when no data comes
- Set-up in the portal: a QR code too long for a camera to read gives its
  place to a code that opens the set-up link (a LAN Bypass configuration
  or a long AmneziaVPN key can be that long). A TV, box or NAS added from
  a phone gets the steps for setting up from another device. Back from
  "Open on the device" keeps the kind, LAN Bypass and the name typed. The
  packet-size note under the kinds is gone
- The portal on phones keeps its place: nothing jumps when an access row
  opens or folds, a notice comes or goes, or Safari redraws the cards. A
  reload, or coming back from the VPN app, opens where the page was. Cards
  glide to their new height, and an animation interrupted half-way goes on
  from where it is instead of snapping. A double click no longer closes
  the sheet it just opened
- In the admin, a device's drawer has its own MTU and keep-alive (empty
  means the server's), each with a Change dialog. A change touches only
  that device's configuration and restarts nothing on the router. Opening
  the drawer no longer counts as handing out the configuration: "Update
  config" stays until the new configuration is shown as a QR code,
  downloaded or copied ("Show the new configuration"). New keys set the
  device up again, as the portal's Reconnect does
- "Speed now" on a server's Overview is live: one point a second over the
  last two minutes, all there as soon as the Overview opens. The agent
  keeps those two minutes in memory and writes them out only while someone
  is looking
- Disguise values that AmneziaWG refuses or crashes on are stopped before
  they reach the kernel. That covers overlapping H1-H4, Jmin above Jmax,
  broken I1-I5 tags, padding under 12 with header protection, and more.
  Import and restore refuse them. After a hand edit in uci, the server's
  tunnel stays down and Health and the service log say why and what to do.
  Errors are full sentences in the reader's language
- The header protection key no longer shows in the status that read-only
  users can see: the Server page says only that the key is set, and each
  device's configuration still has it. The server no longer turns off
  WireGuard's protection against handshake floods (devices keep
  DisableCookies). A device can't be added with a server's own key
- An AmneziaWG update whose kernel module can't be swapped (another
  AmneziaWG interface holds the old one) no longer fails. It is installed,
  the tunnels come back on the old module, and Health and Components say
  the update starts after a reboot. On apk firmware, an install that apk
  left at the old version counts as failed. A module installed by hand is
  recorded, so after a firmware upgrade Health can tell that it is gone
- Dawnline reads only its own tunnels, each one separately. Another
  AmneziaWG interface on the router no longer slows the agent's
  once-a-second check, has its keys read or breaks Dawnline's reads. A
  portal request reads only that person's server: one process however many
  servers there are
- Fewer false disconnects: a tunnel that netifd sets up again no longer
  logs everyone as leaving and coming back, and a device with a long
  keep-alive stays online between handshakes. One configuration on two
  devices isn't logged as roaming every few seconds, and new keys end the
  old session at once. A tunnel that is missing devices is synced within a
  minute, and traffic across a tunnel restart is no longer undercounted
- Renaming a server no longer restarts its tunnel. If a tunnel's interface
  is edited outside Dawnline (LuCI, uci), the watchdog sets it up again
  with Dawnline's settings and names only the changed options. The routing
  rules for "Internet like a home device" change one at a time, new ones
  first, so traffic never falls between them. Health and the Server page
  warn when the address's AAAA record isn't this router's, or the router
  has no public IPv6: devices that prefer IPv6 fail to connect
- The README screenshots come in English and Russian; the portal's are
  taken from its demo. The demo has a switch beside × in the set-up sheet
  to show each state of the connection line. In Russian, long labels in
  the admin's wide option buttons wrap under their icon. DESIGN.md
  describes the switch, renaming on the card, the shimmer, the shake and
  how the portal scrolls. New tests cover link states, the meter, access,
  Health, firewall rules, network settings and packages
2026-10-22 00:11:50 +03:00

128 lines
5.1 KiB
TypeScript

// Generated by web/i18n/extract.ts from the backend's L_() strings (npm run i18n): do not edit.
// The words of service log lines, as written; events/model.ts matches log lines against them.
export const LOG_TEMPLATES: string[] = [
'%d system package',
'%d system packages',
'%s (after %d repair)',
'%s (after %d repairs)',
"%s - %d repairs didn't help",
'%s - %s',
"%s - not repaired again (%d repairs didn't help)",
'%s has no IPv4 address.',
'%s is not a bridge, so Dawnline cannot join the LAN as a device.',
'%s needs a manual switch in Components',
'%s still give devices the old address: set the public address in the server settings (a DDNS name keeps working), then devices need new configurations.',
'%s still gives devices the old address: set the public address in the server settings (a DDNS name keeps working), then devices need new configurations.',
'%s · restored',
'Access rules',
'Activity',
'AmneziaWG is missing from the router',
'AmneziaWG is running again',
'AmneziaWG is running again · accepting connections on port %d',
"AmneziaWG isn't accepting connections on port %d",
"AmneziaWG isn't running",
'Backup',
'Browsers will refuse the portal after that. Renew it with ACME, or choose another certificate in Settings.',
'Changed: %s.',
'Choose a disguise on the Server page: it replaces the values set by hand.',
'Choose another interface name in the server settings.',
'Components',
'Connections',
'DNS for Home-only devices',
"Dawnline didn't stop it: the router's network restarted, someone stopped it by hand, or it failed.",
'Firewall',
'Install it in Dawnline → Components.',
'Install that AmneziaWG build in Dawnline → Components, or switch the disguise on the Server page.',
'Internet like a home device',
'MTU is now automatic',
'Missing: %s.',
'No LAN detected.',
'No free address on %s.',
'No free link-local range for the internal link.',
'No free routing table.',
'People',
'Personal links',
'Personal portal',
'Router',
'Servers',
'Speed',
'System packages',
'The new version did not answer in LuCI or its agent did not start. Try again from Components, or install it with install.sh to see why.',
'Traffic',
'Watchdog',
'Without kmod-nft-offload every packet on this path passes the firewall twice. Install it and restart Dawnline.',
'a new build needs a manual switch in Components',
'answers again',
'are loaded again',
'are missing',
'automatic update failed',
'background check failed: %s',
"can't reach Dawnline (luci.dawnline is missing in rpcd)",
"can't use the network interface %s: it exists and isn't Dawnline's",
'certificate expires %s',
'certificate expires within 7 days',
'certificate renewed · valid until %s',
"couldn't be repaired: %s",
"couldn't be updated - the previous rules stay, and changes to access wait until they load",
"couldn't load - no device is loaded into the tunnels until they do",
"couldn't load devices into the tunnel",
"couldn't start",
"couldn't start · %d failed attempts in %d min",
'failed - internet goes out directly for now',
'failed: %s',
'has an invalid interface name "%s"',
'installed the %s build',
'installed the %s build · %s',
"interface %s has Dawnline's settings again",
'interface %s was changed outside Dawnline',
'is kept down',
'is kept down: its disguise has values AmneziaWG cannot take',
'is kept down: its disguise needs AmneziaWG %s (installed: %s)',
'is kept down: its disguise needs AmneziaWG %s (installed: none)',
'is off',
'is on · traffic enters %s as %s',
'is ready again',
"isn't answering on port %d",
"isn't installed: no tunnel can run - install it in Dawnline → Components",
"isn't installed: tunnels were left as they are",
"isn't known to the network service - restart the network or reboot",
"isn't running",
"isn't running on this router (fw4): tunnels and the portal are closed",
"kernel module isn't installed: no tunnel can run - install it in Dawnline → Components",
"kernel module isn't loaded",
'loading it',
'loading them again',
'moved to word codes',
'netifd reads its protocol handlers when it starts; it was running before AmneziaWG was installed.',
'network changed - Dawnline set itself up again',
'nightly backup failed: %s',
'public address changed · %s → %s',
'reaches Dawnline again',
'reloading rpcd',
'restarted · version %s',
'restarting for the AmneziaWG update',
'restarting it',
'restoring them',
'rules for Dawnline are in place again',
"rules for Dawnline aren't loaded",
'rules for Dawnline were changed or removed',
'runs again',
'runs without its fast path',
'setting it up again',
'started',
'started with the router · version %s',
'started · accepting connections on port %s',
'started · version %s',
'stopped unexpectedly',
'stopped unexpectedly - started again',
'update failed',
'update to %s failed its check - rolled back to %s',
'updated automatically · %s',
'updated automatically · %s → %s',
'updated · %s',
'updated · %s → %s',
'updates available · %s',
'was broken - set up again (%s as %s)',
];