Build packages / Version (push) Waiting to run
- Where people connect from is a globe map now: live arcs from each
person to the server, grey ones for the last 24 h, 7 or 30 days, avatars
instead of dots, the server's own marker, and a light map in light mode;
it zooms to fit the people shown and follows them as they come and go
- Markers that overlap move apart with a pointer to their spot; people
next to the server fold into a count on it; a click zooms in and opens a
floating card (never clipped by the map), closing flies back
- The person page maps where they connected from, older places fading;
the device panel lists its places in order, and connections from the LAN
or through the router's own address stay off the maps ("LAN" in grey)
- Setup and new servers check the UDP port (taken by another program, a
forward or another server) and the subnet (three numbers + .x, a private
range not in use) as you type; the default port is 4500
- The personal portal can share the server's port number (TCP beside UDP);
its port is checked against forwards and other services
- A new server comes up at once: the kernel module is loaded and the
network restarted when OpenWrt doesn't know AmneziaWG yet
- A turned-off server is a state of its own: no "tunnel down" or DNS
warnings, "Turned off" in yellow, a white Turn on, and people on it are
not shown as paused
- Pause everyone is removed: turning a server off does the same (a router
left paused keeps its servers off after the update)
- People: a stopped person's card fades and says why across its bottom,
with the one action that lifts it (Resume, +10 GB, Extend 1 month);
people held by a limit or end date sort below the others, paused last
- The person page shows the state as text ("Paused") with a Resume
button, also while their server is off
- The portal tells a paused or ended person just that, even with the
server off, and lets them change nothing until the admin lifts it (the
router refuses too); its notices look like Overview's
- Automatic MTU: with the field empty the tunnel, computers and routers
get 1380 minus AmneziaWG S4 (1368 on Maximum), phones and tablets 1280;
a typed MTU still caps phones and tablets at 1280, and servers on the
old default 1380 move to automatic (phones and tablets get "Update
config", their old files keep working)
- Only procd's agent runs: a second copy (started by hand or left over)
refuses to start or is ended within 5 minutes, so no more stray paused
and resumed events; a device that leaves the tunnel is offline at once
- The installer picks the newest release (it took the lowest), DNS
lookups can't hang, and tooltips and floating cards close on scroll and
on leaving the page
75 lines
2.3 KiB
Bash
Executable File
75 lines
2.3 KiB
Bash
Executable File
#!/bin/sh /etc/rc.common
|
|
# shellcheck shell=dash disable=SC2034 # START/STOP/USE_PROCD are read by /etc/rc.common
|
|
# Dawnline: AmneziaWG access server — agent and personal portal.
|
|
|
|
START=95
|
|
STOP=10
|
|
USE_PROCD=1
|
|
|
|
PORTAL_ROOT=/usr/share/dawnline/portal/www
|
|
|
|
start_portal() {
|
|
local enabled port certs cert key hport http
|
|
config_get_bool enabled settings portal_enabled 0
|
|
[ "$enabled" = 1 ] || return 0
|
|
config_get port settings portal_port 8443
|
|
certs="$(/usr/bin/dawnline portal-cert 2>/dev/null)"
|
|
cert="${certs% *}"
|
|
key="${certs#* }"
|
|
[ -f "$cert" ] && [ -f "$key" ] || return 0
|
|
# IP addresses in links get plain HTTP on the next port (names stay HTTPS-only).
|
|
hport="$(/usr/bin/dawnline portal-http-port 2>/dev/null)"
|
|
[ -n "$hport" ] && http="-p 0.0.0.0:$hport -p [::]:$hport"
|
|
|
|
procd_open_instance portal
|
|
procd_set_param command /usr/sbin/uhttpd -f -h "$PORTAL_ROOT" -x /cgi-bin -E /cgi-bin/portal \
|
|
-D -n 16 -N 64 -t 20 -T 30 -k 10 -A 1 \
|
|
-s "0.0.0.0:$port" -s "[::]:$port" -C "$cert" -K "$key" $http
|
|
procd_set_param file "$cert"
|
|
procd_set_param respawn 3600 5 0
|
|
procd_close_instance
|
|
}
|
|
|
|
# Plain DNS for Home-only tunnel devices (config written by `dawnline apply`).
|
|
start_resolver() {
|
|
[ -f /var/etc/dawnline-dns.conf ] || return 0
|
|
procd_open_instance dns
|
|
procd_set_param command /usr/libexec/dawnline/resolver
|
|
procd_set_param file /var/etc/dawnline-dns.conf
|
|
# A new config kills it (dawnline.resolver): back within a second, not five.
|
|
procd_set_param respawn 3600 1 0
|
|
procd_close_instance
|
|
}
|
|
|
|
start_service() {
|
|
config_load dawnline
|
|
mkdir -p /var/run/dawnline
|
|
/usr/bin/dawnline apply >/dev/null 2>&1
|
|
|
|
procd_open_instance agent
|
|
procd_set_param command /usr/libexec/dawnline/agent
|
|
procd_set_param respawn 3600 5 0
|
|
procd_set_param stderr 1
|
|
procd_close_instance
|
|
|
|
start_portal
|
|
start_resolver
|
|
}
|
|
|
|
# Noted for the service log: the next agent start is a restart, not a crash or a boot.
|
|
stop_service() {
|
|
mkdir -p /var/run/dawnline
|
|
date +%s > /var/run/dawnline/agent.stopped
|
|
# Copies procd doesn't know about (started by hand, or left by an older version) go too.
|
|
pgrep -f '^/usr/bin/ucode /usr/libexec/dawnline/agent' | xargs -r kill 2>/dev/null
|
|
}
|
|
|
|
reload_service() {
|
|
/usr/bin/dawnline apply >/dev/null 2>&1
|
|
start
|
|
}
|
|
|
|
service_triggers() {
|
|
procd_add_reload_trigger dawnline
|
|
}
|