Files
Aemeath ac90575b0b
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / Backend (Go: vet, tests, a real ubusd and uhttpd) (push) Blocked by required conditions
CI / Package files (push) Blocked by required conditions
Dawnline 0.20.0
- **Backend rewritten in Go.** One daemon, `dawnlined`, replaces the whole ucode backend: the rpcd plugin, the agent, the CLI and the updater. The package no longer depends on ucode.
- **Per-architecture builds.** The release carries the backend for arm64, ARMv7, mips, mipsle and amd64; the router fetches its own after the package is installed and checks its sha256. Dawnline does not run on other architectures (older ARM, 32-bit x86, RISC-V).
- **Faster on the router.** A firewall sync takes 0.06 s instead of 0.9 s; a full apply takes about 300 ms. The portal is served by the daemon itself, without a CGI process per request.
- **Live pages.** The admin and the portal follow a live stream from the router instead of re-fetching the whole state every 30 seconds.
- **Admin redesigned in the portal's style.** Three sections (Overview · Log · Settings); a server is a page of its own with People, Places and Settings; a device opens as a dialog over its person.
- **Changes wait for «Apply».** Every setting, and a person's access, is staged in one dock before it reaches the router.
- **Configuration rollout.** After a change that makes devices fetch their configuration again, the admin shows how many have fetched it and who has not. Every setting shows beforehand (⟳N) how many devices it will touch.
- **Waiting for a decision.** Overview and People put first the people who need one (access ended, limit reached, a device that does not connect), each with its one action a tap away.
- **Bulk actions on people.** «Select» (or a long press on a card) picks several people to extend by a month, pause or resume at once.
- **Undo.** An action done from a card or a request is undone from its toast.
- **Update dialogs redesigned.** An update is one view from its question to its result; Dawnline's own update runs in it like every other, and the page reloads itself once the new version answers. Other versions are a list, each with its notes and Install on a page of its own.
- **Site to site: networks behind a router.** A router connected as a device can have networks behind it (up to eight, /16 to /30): the server routes them and applies the router's access to them. A network that shares addresses with a tunnel, the router's own networks or another site is refused by name.
- **Routers from the portal.** People can add a router and name its networks on their own page; the admin accepts or declines with a reason, or lets them through without asking.
- **Check access and Health know the networks behind routers.**
- **Usage limits reworked.** A monthly limit no longer follows the calendar. A person's month starts with their first traffic and ends a month later; the next one starts only when they connect again, so time away uses up none of it. Before, everyone's limit reset on the 1st.
- Extra data lasts until that person's month ends; «Reset usage» starts the month anew.
- A limit is for a month or for the whole term; the admin and the portal show when it resets.
- Charts that said «this month» show the last 30 days.
- After the update nobody loses what was counted: the month that was running becomes the person's first and ends on the 1st.
- **Access by time of day removed.** The Hours limit is gone from the admin, the portal and the backend; saved hours are dropped.
- **Expiry simplified.** An end date always stops access, with a heads-up three days before; the per-person choice is gone.
- **No false disconnects from sleeping phones.** A phone or a tablet stays online through ten minutes of silence.
- **Mobile Safari fixes.** Pressing a control no longer sends the page to its top; tab tracks that do not fit scroll; switches animate after a press.
2026-11-13 09:43:50 +03:00

149 lines
7.8 KiB
JavaScript

// The backend's messages that reach the portal's visitors, for the translations' extractor (web/i18n/extract.ts reads this file as it read
// the ucode sources): what the Go backend says to people. _() a sentence in the reader's language, N_() one
// with a plural, L_() a line of the service log (written in English, translated where it is shown).
//
// The Go code asks the catalog by these very words (i18n.Catalog.T, N). A sentence the backend says that is
// not listed here has no translation: when you add or change one in backend/, add or change it here, then
// run "npm run i18n" in web/ and translate it (rules/i18n.md). Nothing runs this file.
function portalMessages() {
L_("AmneziaWG is missing from the router");
L_("AmneziaWG is running again · accepting connections on port %d");
L_("AmneziaWG is running again");
L_("AmneziaWG isn't accepting connections on port %d");
L_("AmneziaWG isn't running");
L_("Choose a disguise in Settings → Disguise: it replaces the values set by hand.");
L_("Choose another interface name in the server settings.");
L_("Install that AmneziaWG build in Settings → Updates, or switch the disguise in Settings → Disguise.");
L_("Missing: %s.");
L_("can't use the network interface %s: it exists and isn't Dawnline's");
L_("couldn't load devices into the tunnel");
L_("has an invalid interface name \"%s\"");
L_("is kept down");
L_("is kept down: its disguise has values AmneziaWG cannot take");
L_("is kept down: its disguise needs AmneziaWG %s (installed: %s)");
L_("is kept down: its disguise needs AmneziaWG %s (installed: none)");
L_("is ready again");
L_("isn't installed: no tunnel can run - install it in Dawnline → Components");
L_("isn't known to the network service - restart the network or reboot");
L_("kernel module isn't installed: no tunnel can run - install it in Dawnline → Components");
L_("kernel module isn't loaded");
L_("loading it");
L_("netifd reads its protocol handlers when it starts; it was running before AmneziaWG was installed.");
L_("restarting it");
L_("setting it up again");
N_(0, "%s already has %d device. Remove one first to lower the limit to %d.", "%s already has %d devices. Remove one first to lower the limit to %d.");
_("%s and %s overlap: each packet type needs values of its own.");
_("%s can't use the network interface %s: it exists and isn't Dawnline's.");
_("%s cannot be changed for several people at once.");
_("%s has a tag that is not closed with >.");
_("%s has an invalid interface name \"%s\".");
_("%s has no room for every device on %s.");
_("%s is in the list twice.");
_("%s is kept down.");
_("%s is kept down: its disguise has values AmneziaWG cannot take. %s");
_("%s is kept down: its disguise needs AmneziaWG %s (installed: %s).");
_("%s is kept down: its disguise needs AmneziaWG %s (installed: none).");
_("%s may not contain # or a line break.");
_("%s must be a number or a range like 10-100, up to 65535.");
_("%s must be a number or a range like 100-200, up to 4294967295.");
_("%s must be a number or a range like 5-15, from 1 to 65535.");
_("%s must be a value, not a list.");
_("%s must be a whole number from 0 to 65535.");
_("%s must be at least 12 with header protection.");
_("%s must be from %d to %d.");
_("%s must be on or off.");
_("%s: <%s> is not a tag AmneziaWG apps accept: use <b 0x…> with an even number of hex digits, <r N>, <rc N> or <rd N> with N from 1 to 1000, or <t>.");
_("Access must be lan, internet or both.");
_("Adding devices isn't available right now: the VPN server isn't ready. Ask whoever sent you this link.");
_("AmneziaWG is not installed (%s): install it in Dawnline → Components.");
_("AmneziaWG is not installed: install it in Dawnline → Components.");
_("At most %d people at once.");
_("Circle %s: server %s does not exist.");
_("Cross-site request refused.");
_("Data limit must be a positive number of GB.");
_("Device %s of %s: MTU %d is not between 1280 and 1500.");
_("Device %s of %s: address %s is also used by device %s of %s.");
_("Device %s of %s: address %s is not a plain IPv4 address.");
_("Device %s of %s: address %s is outside %s's tunnel %s.");
_("Device %s of %s: address %s is the router's own address on %s.");
_("Device %s of %s: address (none) is not a plain IPv4 address.");
_("Device %s of %s: keep-alive %d is not between 0 and 600 seconds.");
_("Device %s of %s: the preshared key is not a key.");
_("Device %s of %s: the private key is not a key.");
_("Device %s of %s: the public key is not a key.");
_("Device %s of %s: the public key is the server's own.");
_("Device %s: person %s does not exist.");
_("Device limit must be between 1 and 32.");
_("Device limit reached (%d).");
_("Device not found.");
_("Each change needs the id of a person.");
_("End date must be YYYY-MM-DD.");
_("Endpoint must be a hostname or IP address.");
_("Enter a device name: up to %d letters, digits, spaces and - _ .");
_("Extra data must be a positive number of GB.");
_("I1-I5 together must be at most 2000 characters, not %d.");
_("Interface name: 1-12 lowercase letters, digits or _.");
_("Invalid JSON.");
_("Invalid public key.");
_("Jmin must not be larger than Jmax.");
_("Keep-alive must be 0-600 seconds.");
_("Key generation failed (is amneziawg-tools installed?).");
_("Key generation failed (no random data).");
_("Key generation failed.");
_("MTU must be 1280-1500.");
_("Method not allowed.");
_("Monthly data must be a positive number of GB.");
_("No free address left on %s.");
_("No free addresses left in the server subnet.");
_("Not found.");
_("Nothing to change for %s.");
_("Nothing to change.");
_("Only the admin can change how a device connects.");
_("Only the admin can turn devices off.");
_("Open this link over HTTPS to get the connection settings.");
_("Paused must be true or false.");
_("Person %s: circle %s does not exist.");
_("Person %s: has the same personal link as %s.");
_("Person %s: home service %s does not exist.");
_("Person %s: server %s does not exist.");
_("Port must be 1-65535.");
_("RejectAfterTime must be at most 180 seconds.");
_("Request too large.");
_("S2 must not be S1 + 56: the handshake initiation and response would have the same size.");
_("Set up a server first.");
_("Something went wrong on the router. Try again; if it goes on, look at the Log.");
_("Subnet must look like 10.77.0.0/24.");
_("Subnet overlaps %s.");
_("The admin has turned this device off.");
_("The header protection key is not a key.");
_("The id may use lowercase letters, digits and underscores.");
_("The person has no server.");
_("This key is already in use.");
_("Too many changes in a short time. Try again in a few minutes.");
_("Unknown DNS choice.");
_("Unknown action.");
_("Unknown circle.");
_("Unknown device type.");
_("Unknown device.");
_("Unknown person.");
_("Unknown server.");
_("Unknown service %s.");
_("Your access has ended.");
_("Your access is paused.");
_("\"%s\" already exists.");
_("\"%s\" is already taken.");
_("Networks %s and %s share addresses.");
_("Network %s is not written like 192.168.2.0/24.");
_("Network %s is not private (10.x, 172.16-31.x, 192.168.x).");
_("Network %s is taken on this server. Ask the admin which addresses are free.");
_("Network %s is taken: %s is behind your %s. Two sites need different addresses.");
_("Network %s is taken: %s is the tunnel network of %s. The two ends of a tunnel need different addresses.");
_("Network %s is taken: the router has %s itself. The two ends of a tunnel need different addresses.");
_("Network %s is too wide: /%d at the most.");
_("A router has %d networks behind it at the most.");
_("Add the router as a new device: a device cannot be made one here.");
_("Only a router has networks behind it.");
_("The admin adds routers on this server. Ask them for one.");
_("This router waits for an answer to its request: it has no configuration yet.");
}