Files
Aemeath ac90575b0b
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / Backend (Go: vet, tests, a real ubusd and uhttpd) (push) Blocked by required conditions
CI / Package files (push) Blocked by required conditions
Dawnline 0.20.0
- **Backend rewritten in Go.** One daemon, `dawnlined`, replaces the whole ucode backend: the rpcd plugin, the agent, the CLI and the updater. The package no longer depends on ucode.
- **Per-architecture builds.** The release carries the backend for arm64, ARMv7, mips, mipsle and amd64; the router fetches its own after the package is installed and checks its sha256. Dawnline does not run on other architectures (older ARM, 32-bit x86, RISC-V).
- **Faster on the router.** A firewall sync takes 0.06 s instead of 0.9 s; a full apply takes about 300 ms. The portal is served by the daemon itself, without a CGI process per request.
- **Live pages.** The admin and the portal follow a live stream from the router instead of re-fetching the whole state every 30 seconds.
- **Admin redesigned in the portal's style.** Three sections (Overview · Log · Settings); a server is a page of its own with People, Places and Settings; a device opens as a dialog over its person.
- **Changes wait for «Apply».** Every setting, and a person's access, is staged in one dock before it reaches the router.
- **Configuration rollout.** After a change that makes devices fetch their configuration again, the admin shows how many have fetched it and who has not. Every setting shows beforehand (⟳N) how many devices it will touch.
- **Waiting for a decision.** Overview and People put first the people who need one (access ended, limit reached, a device that does not connect), each with its one action a tap away.
- **Bulk actions on people.** «Select» (or a long press on a card) picks several people to extend by a month, pause or resume at once.
- **Undo.** An action done from a card or a request is undone from its toast.
- **Update dialogs redesigned.** An update is one view from its question to its result; Dawnline's own update runs in it like every other, and the page reloads itself once the new version answers. Other versions are a list, each with its notes and Install on a page of its own.
- **Site to site: networks behind a router.** A router connected as a device can have networks behind it (up to eight, /16 to /30): the server routes them and applies the router's access to them. A network that shares addresses with a tunnel, the router's own networks or another site is refused by name.
- **Routers from the portal.** People can add a router and name its networks on their own page; the admin accepts or declines with a reason, or lets them through without asking.
- **Check access and Health know the networks behind routers.**
- **Usage limits reworked.** A monthly limit no longer follows the calendar. A person's month starts with their first traffic and ends a month later; the next one starts only when they connect again, so time away uses up none of it. Before, everyone's limit reset on the 1st.
- Extra data lasts until that person's month ends; «Reset usage» starts the month anew.
- A limit is for a month or for the whole term; the admin and the portal show when it resets.
- Charts that said «this month» show the last 30 days.
- After the update nobody loses what was counted: the month that was running becomes the person's first and ends on the 1st.
- **Access by time of day removed.** The Hours limit is gone from the admin, the portal and the backend; saved hours are dropped.
- **Expiry simplified.** An end date always stops access, with a heads-up three days before; the per-person choice is gone.
- **No false disconnects from sleeping phones.** A phone or a tablet stays online through ten minutes of silence.
- **Mobile Safari fixes.** Pressing a control no longer sends the page to its top; tab tracks that do not fit scroll; switches animate after a press.
2026-11-13 09:43:50 +03:00

669 lines
33 KiB
JavaScript
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
// The backend's messages, for the translations' extractor (web/i18n/extract.ts reads this file as it read
// the ucode sources): what the Go backend says to people. _() a sentence in the reader's language, N_() one
// with a plural, L_() a line of the service log (written in English, translated where it is shown).
//
// The Go code asks the catalog by these very words (i18n.Catalog.T, N). A sentence the backend says that is
// not listed here has no translation: when you add or change one in backend/, add or change it here, then
// run "npm run i18n" in web/ and translate it (rules/i18n.md). Nothing runs this file.
function messages() {
L_("%d system package");
L_("%d system packages");
L_("%s (after %d repair)");
L_("%s (after %d repairs)");
L_("%s - %d repairs didn't help");
L_("%s - %s");
L_("%s - not repaired again (%d repairs didn't help)");
L_("%s has no IPv4 address.");
L_("%s is not a bridge, so Dawnline cannot join the LAN as a device.");
L_("%s needs a manual switch in Components");
L_("%s still give devices the old address: set the public address in the server settings (a DDNS name keeps working), then devices need new configurations.");
L_("%s still gives devices the old address: set the public address in the server settings (a DDNS name keeps working), then devices need new configurations.");
L_("%s · restored");
L_("Access rules");
L_("Activity");
L_("AmneziaWG is missing from the router");
L_("AmneziaWG is running again · accepting connections on port %d");
L_("AmneziaWG is running again");
L_("AmneziaWG isn't accepting connections on port %d");
L_("AmneziaWG isn't running");
L_("Backup");
L_("Browsers will refuse the portal after that. Renew it with ACME, or choose another certificate in Settings.");
L_("Changed: %s.");
L_("Choose a disguise in Settings → Disguise: it replaces the values set by hand.");
L_("Choose another interface name in the server settings.");
L_("Components");
L_("Connections");
L_("DNS for Home-only devices");
L_("Dawnline didn't stop it: the router's network restarted, someone stopped it by hand, or it failed.");
L_("Firewall");
L_("Install it in Dawnline → Components.");
L_("Install that AmneziaWG build in Settings → Updates, or switch the disguise in Settings → Disguise.");
L_("Internet like a home device");
L_("MTU is now automatic");
L_("Missing: %s.");
L_("No LAN detected.");
L_("No free address on %s.");
L_("No free link-local range for the internal link.");
L_("No free routing table.");
L_("People");
L_("Personal links");
L_("Personal portal");
L_("Router");
L_("Servers");
L_("Speed");
L_("System packages");
L_("The new version did not answer in LuCI or its agent did not start. Try again from Components, or install it with install.sh to see why.");
L_("Traffic");
L_("Watchdog");
L_("Without kmod-nft-offload every packet on this path passes the firewall twice. Install it and restart Dawnline.");
L_("a new build needs a manual switch in Components");
L_("answers again");
L_("are loaded again");
L_("are missing");
L_("automatic update failed");
L_("background check failed: %s");
L_("can't reach Dawnline (luci.dawnline is missing in rpcd)");
L_("can't use the network interface %s: it exists and isn't Dawnline's");
L_("certificate expires %s");
L_("certificate expires within 7 days");
L_("certificate renewed · valid until %s");
L_("couldn't be repaired: %s");
L_("couldn't be updated - the previous rules stay, and changes to access wait until they load");
L_("couldn't load - no device is loaded into the tunnels until they do");
L_("couldn't load devices into the tunnel");
L_("couldn't start · %d failed attempts in %d min");
L_("couldn't start");
L_("failed - internet goes out directly for now");
L_("failed: %s");
L_("has an invalid interface name \"%s\"");
L_("installed the %s build · %s");
L_("installed the %s build");
L_("interface %s has Dawnline's settings again");
L_("interface %s was changed outside Dawnline");
L_("is kept down");
L_("is kept down: its disguise has values AmneziaWG cannot take");
L_("is kept down: its disguise needs AmneziaWG %s (installed: %s)");
L_("is kept down: its disguise needs AmneziaWG %s (installed: none)");
L_("is off");
L_("is on · traffic enters %s as %s");
L_("is ready again");
L_("isn't answering on port %d");
L_("isn't installed: no tunnel can run - install it in Dawnline → Components");
L_("isn't installed: tunnels were left as they are");
L_("isn't known to the network service - restart the network or reboot");
L_("isn't running on this router (fw4): tunnels and the portal are closed");
L_("isn't running");
L_("kernel module isn't installed: no tunnel can run - install it in Dawnline → Components");
L_("kernel module isn't loaded");
L_("loading it");
L_("loading them again");
L_("moved to word codes");
L_("netifd reads its protocol handlers when it starts; it was running before AmneziaWG was installed.");
L_("network changed - Dawnline set itself up again");
L_("nightly backup failed: %s");
L_("public address changed · %s → %s");
L_("reaches Dawnline again");
L_("reloading rpcd");
L_("restarted · version %s");
L_("restarting for the AmneziaWG update");
L_("restarting it");
L_("restoring them");
L_("rules for Dawnline are in place again");
L_("rules for Dawnline aren't loaded");
L_("rules for Dawnline were changed or removed");
L_("runs again");
L_("runs without its fast path");
L_("setting it up again");
L_("started with the router · version %s");
L_("started · accepting connections on port %s");
L_("started · version %s");
L_("started");
L_("stopped unexpectedly - started again");
L_("stopped unexpectedly");
L_("update failed");
L_("update to %s failed its check - rolled back to %s");
L_("updated automatically · %s → %s");
L_("updated automatically · %s");
L_("updated · %s → %s");
L_("updated · %s");
L_("updates available · %s");
L_("was broken - set up again (%s as %s)");
L_("Routes");
L_("couldn't set a route to a network behind a router");
N_(0, "%d device is loaded in the tunnel.", "%d devices are loaded in the tunnel.");
N_(0, "%d of %d device missing, %d loaded that should not be.", "%d of %d devices missing, %d loaded that should not be.");
N_(0, "%d of %d device missing.", "%d of %d devices missing.");
N_(0, "%d package update in the feeds: %s", "%d package updates in the feeds: %s");
N_(0, "%s AAAA → %s is not a public address of this router: devices that prefer IPv6 will fail to connect. Fix or remove this AAAA record.", "%s AAAA → %s are not public addresses of this router: devices that prefer IPv6 will fail to connect. Fix or remove these AAAA records.");
N_(0, "%s AAAA → %s, but this router has no public IPv6 address: devices that prefer IPv6 will fail to connect. Remove this AAAA record or set up IPv6 on the router.", "%s AAAA → %s, but this router has no public IPv6 address: devices that prefer IPv6 will fail to connect. Remove these AAAA records or set up IPv6 on the router.");
N_(0, "%s already has %d device. Remove one first to lower the limit to %d.", "%s already has %d devices. Remove one first to lower the limit to %d.");
N_(0, "%s is missing.", "%s are missing.");
N_(0, "%s → %s: IPv6 only, and not a public address of this router: no device can connect. Check your DNS / DDNS.", "%s → %s: IPv6 only, and not public addresses of this router: no device can connect. Check your DNS / DDNS.");
N_(0, "Reloading the kernel module (%d tunnel restarts)", "Reloading the kernel module (%d tunnels restart)");
_("%d MB free on the overlay");
_("%d MB free on the overlay.");
_("%s MB free: settings may stop saving. Remove old backups (Settings → Backups) or shorten the history.");
_("%s already exists.");
_("%s and %s are not in one circle");
_("%s and %s overlap: each packet type needs values of its own.");
_("%s can't be reached: %s");
_("%s can't be reached: it is turned off");
_("%s can't be reached: their access has ended");
_("%s can't be reached: their server is turned off");
_("%s can't be reached: they are paused");
_("%s can't be reached: they have no server");
_("%s can't be reached: they used up their data");
_("%s can't connect: %s");
_("%s can't connect: their access has ended");
_("%s can't connect: their server is turned off");
_("%s can't connect: they are paused");
_("%s can't connect: they have no server");
_("%s can't connect: they used up their data");
_("%s can't use the network interface %s: it exists and isn't Dawnline's.");
_("%s cannot be changed for several people at once.");
_("%s covers %s and is valid for more than 14 days.");
_("%s does not cover %s (it has %s): browsers will warn.");
_("%s does not exist.");
_("%s does not overlap other networks.");
_("%s does not resolve.");
_("%s doesn't reach %s");
_("%s expires within 14 days.");
_("%s goes through Cloudflare; in Russia such connections often stall after ~16 KB.");
_("%s has Home and Internet");
_("%s has Home only");
_("%s has Home only: only DNS and the portal on the router.");
_("%s has Home only: their device's own internet reaches it, not the tunnel.");
_("%s has Internet only");
_("%s has Internet only.");
_("%s has Internet only: only DNS and the portal on the router.");
_("%s has a tag that is not closed with >.");
_("%s has an invalid interface name \"%s\".");
_("%s has never connected");
_("%s has no IPv4 address.");
_("%s has no room for every device on %s.");
_("%s has no server");
_("%s has only some home services");
_("%s is %s, one of %s's home services");
_("%s is 0 or 1.");
_("%s is active");
_("%s is at home (%s)");
_("%s is connected");
_("%s is down.");
_("%s is down: %s.");
_("%s is in %s, which %s doesn't reach");
_("%s is in home network %s");
_("%s is in the list twice.");
_("%s is kept down.");
_("%s is kept down: its disguise has values AmneziaWG cannot take. %s");
_("%s is kept down: its disguise needs AmneziaWG %s (installed: %s).");
_("%s is kept down: its disguise needs AmneziaWG %s (installed: none).");
_("%s is not a bridge, so Dawnline cannot join the LAN as a device.");
_("%s is not a common home subnet: the networks people connect from rarely use the same addresses.");
_("%s is not a package Dawnline manages");
_("%s is not an IP address.");
_("%s is not in a firewall zone, so the server port cannot be opened on it.");
_("%s is not one of %s's home services");
_("%s is not one of Dawnline's tunnels.");
_("%s is on another server");
_("%s is on the internet");
_("%s is one of the most common home subnets. On a network with the same addresses, people with home access reach your home instead of their own: their printer or TV there is out of reach while connected, with LAN Bypass too. A rarer subnet for your home network avoids it, for example 10.37.12.0/24.");
_("%s is part of %s; choose %s instead.");
_("%s is the WAN.");
_("%s is this router on a network %s doesn't reach");
_("%s is this router");
_("%s is this router: DNS is open to everyone");
_("%s is this router: the personal portal is open to everyone");
_("%s is turned off");
_("%s is up, listening on UDP %d.");
_("%s isn't connected right now");
_("%s isn't in %s's home network");
_("%s may not contain # or a line break.");
_("%s must be a number or a range like 10-100, up to 65535.");
_("%s must be a number or a range like 100-200, up to 4294967295.");
_("%s must be a number or a range like 5-15, from 1 to 65535.");
_("%s must be a value, not a list.");
_("%s must be a whole number from 0 to 65535.");
_("%s must be at least 12 with header protection.");
_("%s must be from %d to %d.");
_("%s must be on or off.");
_("%s on this router");
_("%s overlaps %s.");
_("%s points at %s, not this router (%s).");
_("%s points at %s, not this router (WAN %s). Check your DNS / DDNS.");
_("%s points at this router (%s).");
_("%s reaches %s.");
_("%s reaches no home network.");
_("%s · interface settings");
_("%s → %s (Cloudflare). %s reaches the router only if this name is DNS-only there, or use the router's IP.");
_("%s → %s (this router).");
_("%s → %s: IPv6 only, but this router has no public IPv6 address: no device can connect. Check your DNS / DDNS, or set up IPv6 on the router.");
_("%s → %s: IPv6 only, so only devices with IPv6 connect (the router's IPv4 %s has no name).");
_("%s → %s: IPv6 only, so only devices with IPv6 connect.");
_("%s: <%s> is not a tag AmneziaWG apps accept: use <b 0x…> with an even number of hex digits, <r N>, <rc N> or <rd N> with N from 1 to 1000, or <t>.");
_("%s: the device's own network handles it.");
_("(%d more)");
_("Access must be lan, internet or both.");
_("Access rules aren’t loaded");
_("Access rules couldn't be updated (%s): the previous rules stay, so this change isn't in effect yet.");
_("Access rules couldn't load (%s): no device is loaded into the tunnels until they do.");
_("Access rules loaded");
_("Access rules");
_("Adding devices isn't available right now: the VPN server isn't ready. Ask whoever sent you this link.");
_("Address must be an IPv4 address.");
_("Agent");
_("All ports");
_("Allowed: %s");
_("AmneziaWG %s: no source publishes this build for this firmware any more");
_("AmneziaWG answers may not reach devices");
_("AmneziaWG firewall rules are missing");
_("AmneziaWG installed");
_("AmneziaWG is down");
_("AmneziaWG is installed, but its kernel module doesn't load on this firmware");
_("AmneziaWG is not installed (%s): install it in Dawnline → Components.");
_("AmneziaWG is not installed");
_("AmneziaWG is not installed: install it in Dawnline → Components, then choose Balanced.");
_("AmneziaWG is not installed: install it in Dawnline → Components, then choose Maximum.");
_("AmneziaWG is not installed: install it in Dawnline → Components.");
_("AmneziaWG is up to date (%s)");
_("AmneziaWG isn’t installed");
_("AmneziaWG needs a build for the new firmware");
_("AmneziaWG port is taken");
_("AmneziaWG subnet overlaps another network");
_("AmneziaWG update is available: %s → %s");
_("AmneziaWG's kernel module doesn't load on this firmware: reinstall a build for this kernel in Components.");
_("AmneziaWG’s kernel module doesn’t load");
_("An update is running: wait for it to finish, then remove Dawnline.");
_("Another component action is already running");
_("Answers from %s are swallowed by a proxy on the router (%s): clients get no reply.");
_("Answers from %s go straight out. A proxy on the router diverts its own traffic (%s); these answers skip it.");
_("Answers from %s go straight out.");
_("Answers reach devices");
_("At most %d people at once.");
_("Automatic update: %s");
_("Background agent isn’t running");
_("Background agent running");
_("Backing up configuration");
_("Backup does not contain /etc/config/dawnline.");
_("Backup failed: %s");
_("Backup failed: the archive could not be written (is the flash full?)");
_("Backup is too large.");
_("Backup not found.");
_("Balanced needs AmneziaWG 2.0 or newer on the router: install a current build in Dawnline → Components.");
_("Both are %s's devices");
_("Both are in %s");
_("Cannot detect the firmware target");
_("Cannot reach github.com/%s");
_("Check every 6h, 12h, 1d or 7d.");
_("Checking AmneziaWG");
_("Checking Dawnline");
_("Checking system packages");
_("Choose a device on at least one side.");
_("Choose a free port between 1 and 65535 (not 22, 53, 80 or 443).");
_("Choose a system log level: errors, warnings, normal or verbose.");
_("Choose the interface that leads to the internet.");
_("Circle %s: server %s does not exist.");
_("Clock is set");
_("Clock isn’t set");
_("Could not find a free id, try again.");
_("Couldn't load devices into %s: %s.");
_("Couldn't save /etc/config/dawnline: %s. Is the flash full?");
_("Couldn't save /etc/config/dawnline: the write failed. Is the flash full?");
_("Couldn't write %s. Is the flash full?");
_("Counts traffic and enforces end dates and quotas.");
_("Cross-site request refused.");
_("DNS for Home-only devices isn’t working");
_("DNS for Home-only devices");
_("Daily traffic history must be 7-1830 days.");
_("Data limit must be a positive number of GB.");
_("Dawnline is up to date (%s)");
_("Dawnline update is available: %s → %s");
_("Default device limit must be 1-32.");
_("Device %s of %s: MTU %d is not between 1280 and 1500.");
_("Device %s of %s: address %s is also used by device %s of %s.");
_("Device %s of %s: address %s is not a plain IPv4 address.");
_("Device %s of %s: address %s is outside %s's tunnel %s.");
_("Device %s of %s: address %s is the router's own address on %s.");
_("Device %s of %s: address (none) is not a plain IPv4 address.");
_("Device %s of %s: keep-alive %d is not between 0 and 600 seconds.");
_("Device %s of %s: the preshared key is not a key.");
_("Device %s of %s: the private key is not a key.");
_("Device %s of %s: the public key is not a key.");
_("Device %s of %s: the public key is the server's own.");
_("Device %s: person %s does not exist.");
_("Device limit must be between 1 and 32.");
_("Device limit reached (%d).");
_("Device not found.");
_("Devices in one circle reach each other.");
_("Devices loaded");
_("Devices of different servers never reach each other.");
_("Devices reach each other on this server");
_("Domain may use lowercase letters, digits, dashes and dots.");
_("Download failed: %s");
_("Downloading %s from %s");
_("Downloading %s");
_("Each change needs the id of a person.");
_("End date must be YYYY-MM-DD.");
_("End dates and quotas use the router clock.");
_("Endpoint must be a hostname or IP address.");
_("Enter a circle name: up to 32 characters, without < > \" or \\.");
_("Enter a device name: up to %d letters, digits, spaces and - _ .");
_("Enter a name: up to 48 characters, without < > \" or \\.");
_("Enter a time as HH:MM, 00:00 to 23:59.");
_("Error: %s");
_("Every device has a key and an address of its own inside its server.");
_("Extra data must be a positive number of GB.");
_("Fallback DNS must be an IPv4 address (or empty for none).");
_("File %s does not exist.");
_("Finished");
_("Firewall rules");
_("Firewall zone or WAN rule is missing.");
_("Firewall");
_("Free space on the router");
_("GitHub API rate limit reached: try again in an hour.");
_("GitHub did not answer, trying mirrors");
_("GitHub: %s");
_("HTTPS isn't available on this router: install %s.");
_("Home access includes the router.");
_("Home access reaches every home network.");
_("Home and Internet");
_("Home devices reach only people with home access.");
_("Home network addresses");
_("Home only");
_("Home");
_("I1-I5 together must be at most 2000 characters, not %d.");
_("Install updates immediately or scheduled.");
_("Installation failed");
_("Installed Dawnline %s is newer than the release %s");
_("Installing %s");
_("Installing package");
_("Installing the %s build");
_("Installing the translation");
_("Interface name: 1-12 lowercase letters, digits or _.");
_("Internet like a home device isn’t working");
_("Internet like a home device not bypassed");
_("Internet like a home device");
_("Internet only");
_("Internet traffic leaves through WAN directly.");
_("Invalid JSON.");
_("Invalid backup name.");
_("Invalid option %s.");
_("Invalid port %s.");
_("Invalid public key.");
_("Invalid section %s.");
_("Invalid service id.");
_("Invalid value for %s.");
_("It is in the tunnel network %s.");
_("It leaves like a home device would.");
_("It leaves through %s.");
_("It leaves through the WAN.");
_("Its configuration doesn't send it to the router");
_("Its configuration sends it to the router");
_("Jmin must not be larger than Jmax.");
_("Keep activity for 0 (no age limit) to 9999 days.");
_("Keep-alive must be 0-600 seconds.");
_("Keeping AmneziaWG %s for rollback");
_("Keeping Dawnline %s for rollback");
_("Kernel module, awg tool and the netifd protocol are present.");
_("Key generation failed (is amneziawg-tools installed?).");
_("Key generation failed (no random data).");
_("Key generation failed.");
_("Links on %s use plain HTTP: the link and the VPN keys in configurations travel unencrypted.");
_("Links on IP addresses use plain HTTP on the next port (%d), which the portal cannot take. Choose another portal port.");
_("Listening on TCP %d.");
_("Loading the kernel module");
_("Log size must be 100-20000 events.");
_("Looking for the %s build for OpenWrt %s");
_("LuCI link");
_("MTU must be 1280-1500.");
_("Maximum needs AmneziaWG 3.1 on the router (kmod-amneziawg, amneziawg-tools 3.1): install a 3.1 build in Dawnline → Components.");
_("Method not allowed.");
_("Monthly data must be a positive number of GB.");
_("Monthly traffic history must be 1-120 months.");
_("Needs %s. Internet traffic leaves through WAN directly until then.");
_("Network interface %s already exists.");
_("Networks a person does not reach cannot reach them either.");
_("No %s build for OpenWrt %s in %s, or it could not be verified");
_("No AmneziaWG build for OpenWrt %s (%s) yet");
_("No AmneziaWG build for OpenWrt %s yet");
_("No LAN detected.");
_("No device uses %s");
_("No free address left on %s.");
_("No free address on %s.");
_("No free addresses left in the server subnet.");
_("No free link-local range for the internal link.");
_("No free routing table.");
_("No other policy routing ahead of the tunnel rules.");
_("No previous AmneziaWG build is kept on the router");
_("No previous Dawnline version is kept on the router");
_("No public address: devices will not know where to connect.");
_("No release %s in %s.");
_("No server yet");
_("No server yet.");
_("Not a Dawnline export.");
_("Not a valid backup archive.");
_("Not enough free space on the router: %d MB free, about %d MB needed. Remove old backups or packages first");
_("Not every device is loaded into AmneziaWG");
_("Not found.");
_("Not set up.");
_("Nothing listens on TCP %d.");
_("Nothing to change for %s.");
_("Nothing to change.");
_("Nothing to install");
_("Nothing to save.");
_("Older than must be a number of days.");
_("On one of the networks %s reaches.");
_("One of the networks %s reaches.");
_("Only devices of people with home access can be reached.");
_("Only home devices reach people's devices.");
_("Only people with home access reach other devices.");
_("Only the admin can change how a device connects.");
_("Only the admin can turn devices off.");
_("Open Overview → Health.");
_("Open this link over HTTPS to get the connection settings.");
_("Other addresses must be hostnames or IP addresses.");
_("Other policy routing bypasses the home-device path");
_("Package installation failed");
_("Paused must be true or false.");
_("People and devices are inconsistent");
_("People and devices consistent");
_("Person %s: circle %s does not exist.");
_("Person %s: has the same personal link as %s.");
_("Person %s: home service %s does not exist.");
_("Person %s: server %s does not exist.");
_("Personal portal isn’t working");
_("Personal portal");
_("Plain HTTP links");
_("Plain resolver on port %d.");
_("Plain resolver running next to the LAN (%s).");
_("Policy routing on the router (%s) sends marked traffic straight out, past the home-device path: tunnel traffic it matches skips your LAN's proxies and filters.");
_("Port is free");
_("Port must be 1-65535.");
_("Portal address doesn’t point here");
_("Portal address isn’t set");
_("Portal address points here");
_("Portal address");
_("Portal answers may not reach visitors");
_("Portal answers reach visitors");
_("Portal certificate needs attention");
_("Portal certificate");
_("Portal links use plain HTTP");
_("Portal port must be 1-65535.");
_("Portal");
_("Ports %s");
_("Private addresses outside the home network are blocked.");
_("Public address must be a hostname or IP address.");
_("Public address needs attention");
_("Public address");
_("Redirect must be a full http:// or https:// address.");
_("Refreshing package lists");
_("RejectAfterTime must be at most 180 seconds.");
_("Release %s has no %s: it stays as it is");
_("Release %s has no translation into %s: install a release that has one");
_("Release %s publishes no checksum for %s: not installing an unverified package");
_("Removing the translation");
_("Request too large.");
_("Resolver");
_("Restarting the network so it knows AmneziaWG (connections drop for a few seconds)");
_("Restarting with the new settings.");
_("Rolling back to %s");
_("S2 must not be S1 + 56: the handshake initiation and response would have the same size.");
_("Save the log every 10min, hourly or off.");
_("Server %d");
_("Server %s: %s is one of the router's own network interfaces.");
_("Server %s: %s");
_("Server %s: UDP %s is also used by %s.");
_("Server %s: interface %s is also used by %s.");
_("Server ID may use lowercase letters, digits and underscores.");
_("Server configured");
_("Server is disabled.");
_("Server → Access → Home network.");
_("Server");
_("Server: Enter a name: up to 48 characters, without < > \" or \\.");
_("Service: Enter a name: up to 48 characters, without < > \" or \\.");
_("Set a server up in Settings.");
_("Set the public hostname in Settings so links can be generated.");
_("Set up a server first.");
_("Setup failed: %s");
_("Something went wrong on the router. Try again; if it goes on, look at the Log.");
_("Subnet is unique");
_("Subnet must look like 10.77.0.0/24.");
_("Subnet overlaps %s.");
_("Such devices are left out of the tunnels: fix or remove them.");
_("System packages are up to date");
_("TCP %d is already used by %s. Choose another port in Settings.");
_("TCP %d is already used by %s. Choose another portal port.");
_("TCP %d is already used by %s. Links on IP addresses use plain HTTP on the port after the portal's. Choose another portal port.");
_("TCP %d is sent on by port forward “%s”. Choose another portal port.");
_("Table inet dawnline enforces who may reach LAN and the internet.");
_("Table inet dawnline is missing: no device is loaded into the tunnels until it is back.");
_("That id is taken.");
_("That is the same device");
_("The AmneziaWG update is installed and starts after a reboot.");
_("The AmneziaWG update waits for a reboot");
_("The WAN address %s is CGNAT (shared by the ISP): %s cannot be forwarded to this router from outside unless the ISP gives a public address or IPv6.");
_("The WAN address %s is private: this router is behind another one. Forward %s on it, or devices cannot connect.");
_("The admin has turned this device off.");
_("The configuration in this file cannot be read.");
_("The devices in AmneziaWG could not be checked");
_("The firewall lets it through");
_("The firmware changed (kernel %s → %s): the AmneziaWG build installed for it is gone. Install the build for this firmware.");
_("The header protection key is not a key.");
_("The id may use lowercase letters, digits and underscores.");
_("The kept AmneziaWG build was made for another firmware: it would not load on this one");
_("The kernel module doesn't load. Reinstall a build for this kernel in Components.");
_("The kernel module doesn't load: %s Reinstall a build for this kernel in Components.");
_("The link is up but not attached to %s.");
_("The main address is an IP: its links use plain HTTP.");
_("The network doesn’t know AmneziaWG yet");
_("The new AmneziaWG kernel module doesn't load on this firmware: the tunnels stay down until it does (see the log above)");
_("The old kernel module stays loaded (another AmneziaWG interface may use it): the AmneziaWG update is installed and starts after a reboot.");
_("The person has no server.");
_("The resolver is not running; Home-only devices cannot resolve names.");
_("The router clock looks wrong; end dates will misbehave. Check NTP.");
_("The router is running out of flash");
_("The router reaches it only while its VPN is on.");
_("The translation could not be removed");
_("The tunnel could not be read, so its devices could not be checked.");
_("The update stopped unexpectedly.");
_("There is no session the router could reach.");
_("This configuration can't be used: %s");
_("This is a SNAPSHOT firmware: the AmneziaWG projects publish builds for releases only");
_("This key is already in use.");
_("Too many changes in a short time. Try again in a few minutes.");
_("Traffic enters %s as %s, so it is handled like any device on your LAN.");
_("Trying mirror %s");
_("Tunnel running");
_("Turn the device on again on its page.");
_("Type \"remove\" to confirm.");
_("UDP %d is also used by %s.");
_("UDP %d is used by %s. Choose another port.");
_("UDP port must be 1-65535.");
_("Unexpected entry in backup: %s");
_("Unexpected file in backup: %s");
_("Unknown AmneziaWG build %s");
_("Unknown DNS choice.");
_("Unknown action.");
_("Unknown category.");
_("Unknown choice for devices reaching each other.");
_("Unknown circle.");
_("Unknown component %s");
_("Unknown device type.");
_("Unknown device.");
_("Unknown disguise method.");
_("Unknown fix.");
_("Unknown location service.");
_("Unknown page.");
_("Unknown person.");
_("Unknown release.");
_("Unknown scope.");
_("Unknown server.");
_("Unknown service %s.");
_("Unknown service.");
_("Unknown setting %s.");
_("Unknown update target.");
_("Update failed");
_("Updating %s");
_("Updating AmneziaWG");
_("Updating Dawnline");
_("Updating system packages");
_("Upload is empty or too large.");
_("Use a private range: 10.x.x.x, 172.16–31.x.x or 192.168.x.x.");
_("Using a self-signed certificate: browsers will show a warning. ACME can get a free Let’s Encrypt one.");
_("Using a self-signed certificate: browsers will show a warning.");
_("Warning: %s sent a file that does not match GitHub's sha256, discarded");
_("Warning: could not keep %s: %s");
_("Warning: the installed build is no longer published, nothing to keep for rollback");
_("Your access has ended.");
_("Your access is paused.");
_("Zone %s and the WAN rule for UDP %d exist.");
_("\"%s\" already exists.");
_("\"%s\" is already taken.");
_("\"%s\" is not a device or an IPv4 address.");
_("\"Devices reach each other\" is off on %s");
_("another program on this router");
_("apk did not install %s %s (installed: %s)");
_("apk did not reinstall the version that is already installed");
_("apk doesn't reinstall an installed version. Install a different release, or run install.sh on the router");
_("home");
_("interface %s");
_("netifd doesn't know the amneziawg protocol (AmneziaWG missing, or the network wasn't restarted after installing it).");
_("no circle");
_("port forward “%s”");
_("server “%s”");
_("sha256 matches the release (%s…)");
_("the router itself");
_("Networks %s and %s share addresses.");
_("Network %s is not written like 192.168.2.0/24.");
_("Network %s is not private (10.x, 172.16-31.x, 192.168.x).");
_("Network %s is taken: %s is behind %s (%s). Two sites need different addresses.");
_("Network %s is taken: %s is the tunnel network of %s. The two ends of a tunnel need different addresses.");
_("Network %s is taken: the router has %s itself. The two ends of a tunnel need different addresses.");
_("Network %s is too wide: /%d at the most.");
_("A router has %d networks behind it at the most.");
_("Couldn't set the routes to the networks behind routers (%s): they aren't reachable yet.");
_("Only a router has networks behind it.");
_("Network %s is taken on this server. Ask the admin which addresses are free.");
_("Network %s is taken: %s is behind your %s. Two sites need different addresses.");
_("Add the router as a new device: a device cannot be made one here.");
_("The admin adds routers on this server. Ask them for one.");
_("This router waits for an answer to its request: it has no configuration yet.");
_("This device asks for nothing.");
_("Unknown answer.");
_("Unknown choice for routers on people's pages.");
_("%s is behind %s");
_("%s: the tunnel carries this network, and the rules see a host there as they see the router.");
_("%s is behind this device");
_("A router reaches its own network without the tunnel.");
_("Networks behind routers");
_("%s behind %s is not a network a router may have behind it.");
_("%s behind %s is written twice, or is one more than a router may have.");
_("%s behind %s shares addresses with the tunnel network of %s (%s).");
_("%s behind %s shares addresses with %s behind %s.");
_("%s behind %s shares addresses with %s, which the router has itself.");
_("Such a network is not in effect: change it in the server's Network settings.");
_("A network behind a router isn’t in effect");
_("A route to a network behind a router couldn't be set: %s.");
_("A network behind a router has no route");
N_(0, "%d network behind routers is carried by the tunnel.", "%d networks behind routers are carried by the tunnel.");
}