5 Commits
Author SHA1 Message Date
Aemeath ac90575b0b Dawnline 0.20.0
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / Backend (Go: vet, tests, a real ubusd and uhttpd) (push) Blocked by required conditions
CI / Package files (push) Blocked by required conditions
- **Backend rewritten in Go.** One daemon, `dawnlined`, replaces the whole ucode backend: the rpcd plugin, the agent, the CLI and the updater. The package no longer depends on ucode.
- **Per-architecture builds.** The release carries the backend for arm64, ARMv7, mips, mipsle and amd64; the router fetches its own after the package is installed and checks its sha256. Dawnline does not run on other architectures (older ARM, 32-bit x86, RISC-V).
- **Faster on the router.** A firewall sync takes 0.06 s instead of 0.9 s; a full apply takes about 300 ms. The portal is served by the daemon itself, without a CGI process per request.
- **Live pages.** The admin and the portal follow a live stream from the router instead of re-fetching the whole state every 30 seconds.
- **Admin redesigned in the portal's style.** Three sections (Overview · Log · Settings); a server is a page of its own with People, Places and Settings; a device opens as a dialog over its person.
- **Changes wait for «Apply».** Every setting, and a person's access, is staged in one dock before it reaches the router.
- **Configuration rollout.** After a change that makes devices fetch their configuration again, the admin shows how many have fetched it and who has not. Every setting shows beforehand (⟳N) how many devices it will touch.
- **Waiting for a decision.** Overview and People put first the people who need one (access ended, limit reached, a device that does not connect), each with its one action a tap away.
- **Bulk actions on people.** «Select» (or a long press on a card) picks several people to extend by a month, pause or resume at once.
- **Undo.** An action done from a card or a request is undone from its toast.
- **Update dialogs redesigned.** An update is one view from its question to its result; Dawnline's own update runs in it like every other, and the page reloads itself once the new version answers. Other versions are a list, each with its notes and Install on a page of its own.
- **Site to site: networks behind a router.** A router connected as a device can have networks behind it (up to eight, /16 to /30): the server routes them and applies the router's access to them. A network that shares addresses with a tunnel, the router's own networks or another site is refused by name.
- **Routers from the portal.** People can add a router and name its networks on their own page; the admin accepts or declines with a reason, or lets them through without asking.
- **Check access and Health know the networks behind routers.**
- **Usage limits reworked.** A monthly limit no longer follows the calendar. A person's month starts with their first traffic and ends a month later; the next one starts only when they connect again, so time away uses up none of it. Before, everyone's limit reset on the 1st.
- Extra data lasts until that person's month ends; «Reset usage» starts the month anew.
- A limit is for a month or for the whole term; the admin and the portal show when it resets.
- Charts that said «this month» show the last 30 days.
- After the update nobody loses what was counted: the month that was running becomes the person's first and ends on the 1st.
- **Access by time of day removed.** The Hours limit is gone from the admin, the portal and the backend; saved hours are dropped.
- **Expiry simplified.** An end date always stops access, with a heads-up three days before; the per-person choice is gone.
- **No false disconnects from sleeping phones.** A phone or a tablet stays online through ten minutes of silence.
- **Mobile Safari fixes.** Pressing a control no longer sends the page to its top; tab tracks that do not fit scroll; switches animate after a press.
2026-11-13 09:43:50 +03:00
Aemeath dc0f159447 Dawnline 0.14.0
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / ucode static checks (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 24.10) (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 25.12) (push) Blocked by required conditions
- A device is renamed where its name stands on its card: a click on the
  name, Return or Space on it, or Rename in the ⋯ menu turns it into a
  field with the name selected. Return saves, and the words shimmer until
  the router answers. Esc or a click elsewhere puts the old name back. The
  rename window is gone, and the page no longer redraws under a name being
  edited
- Device names take up to 20 characters: letters of any language, digits,
  spaces and - _ . The router refuses anything else when a device is added
  or renamed, so a name can't carry symbols into configurations, file
  names or the AmneziaVPN key. The portal and the admin turn a character
  like that away as it is typed: the field shakes, its outline goes red
  and a short line says why. Suggested names (a phone's model, "Phone 2")
  are stripped of such characters and cut to fit. Names set before this
  stay as they are
- LAN Bypass: Add a device, in the portal and in the admin, has a switch
  that keeps the device's own local network (printer, TV, NAS) reachable
  while it is connected. It is off by default and stays as chosen; the
  admin's device drawer shows it. With home and internet access the switch
  says which addresses still lead to the home network
- Health warns when a server's home network is on one of the subnets home
  routers come with (192.168.0.x, 192.168.1.x and others). People with
  home access who connect from a network on the same addresses reach your
  home instead of their own, LAN Bypass or not
- The router tells when a device can't connect properly. After the problem
  lasts three minutes, the portal card and the admin drawer name it:
  can't finish connecting (the network may block it), connected but no
  data (an outdated configuration, and the card offers Reconnect), on two
  devices at once, or a connection that keeps dropping. Activity lists
  these under Problems, one line per device per hour, and says when the
  device connects normally again
- The set-up sheet's connection line follows what the device does:
  waiting, can't finish, connected, or connected but no data. The sheet
  closes by itself only once data comes through. On the device itself and
  for a router, the steps regroup to what fixes the problem: "Set it up
  again" when the handshake never finishes, "Add the connection again"
  ("Import the configuration again" for a router) when no data comes
- Set-up in the portal: a QR code too long for a camera to read gives its
  place to a code that opens the set-up link (a LAN Bypass configuration
  or a long AmneziaVPN key can be that long). A TV, box or NAS added from
  a phone gets the steps for setting up from another device. Back from
  "Open on the device" keeps the kind, LAN Bypass and the name typed. The
  packet-size note under the kinds is gone
- The portal on phones keeps its place: nothing jumps when an access row
  opens or folds, a notice comes or goes, or Safari redraws the cards. A
  reload, or coming back from the VPN app, opens where the page was. Cards
  glide to their new height, and an animation interrupted half-way goes on
  from where it is instead of snapping. A double click no longer closes
  the sheet it just opened
- In the admin, a device's drawer has its own MTU and keep-alive (empty
  means the server's), each with a Change dialog. A change touches only
  that device's configuration and restarts nothing on the router. Opening
  the drawer no longer counts as handing out the configuration: "Update
  config" stays until the new configuration is shown as a QR code,
  downloaded or copied ("Show the new configuration"). New keys set the
  device up again, as the portal's Reconnect does
- "Speed now" on a server's Overview is live: one point a second over the
  last two minutes, all there as soon as the Overview opens. The agent
  keeps those two minutes in memory and writes them out only while someone
  is looking
- Disguise values that AmneziaWG refuses or crashes on are stopped before
  they reach the kernel. That covers overlapping H1-H4, Jmin above Jmax,
  broken I1-I5 tags, padding under 12 with header protection, and more.
  Import and restore refuse them. After a hand edit in uci, the server's
  tunnel stays down and Health and the service log say why and what to do.
  Errors are full sentences in the reader's language
- The header protection key no longer shows in the status that read-only
  users can see: the Server page says only that the key is set, and each
  device's configuration still has it. The server no longer turns off
  WireGuard's protection against handshake floods (devices keep
  DisableCookies). A device can't be added with a server's own key
- An AmneziaWG update whose kernel module can't be swapped (another
  AmneziaWG interface holds the old one) no longer fails. It is installed,
  the tunnels come back on the old module, and Health and Components say
  the update starts after a reboot. On apk firmware, an install that apk
  left at the old version counts as failed. A module installed by hand is
  recorded, so after a firmware upgrade Health can tell that it is gone
- Dawnline reads only its own tunnels, each one separately. Another
  AmneziaWG interface on the router no longer slows the agent's
  once-a-second check, has its keys read or breaks Dawnline's reads. A
  portal request reads only that person's server: one process however many
  servers there are
- Fewer false disconnects: a tunnel that netifd sets up again no longer
  logs everyone as leaving and coming back, and a device with a long
  keep-alive stays online between handshakes. One configuration on two
  devices isn't logged as roaming every few seconds, and new keys end the
  old session at once. A tunnel that is missing devices is synced within a
  minute, and traffic across a tunnel restart is no longer undercounted
- Renaming a server no longer restarts its tunnel. If a tunnel's interface
  is edited outside Dawnline (LuCI, uci), the watchdog sets it up again
  with Dawnline's settings and names only the changed options. The routing
  rules for "Internet like a home device" change one at a time, new ones
  first, so traffic never falls between them. Health and the Server page
  warn when the address's AAAA record isn't this router's, or the router
  has no public IPv6: devices that prefer IPv6 fail to connect
- The README screenshots come in English and Russian; the portal's are
  taken from its demo. The demo has a switch beside × in the set-up sheet
  to show each state of the connection line. In Russian, long labels in
  the admin's wide option buttons wrap under their icon. DESIGN.md
  describes the switch, renaming on the card, the shimmer, the shake and
  how the portal scrolls. New tests cover link states, the meter, access,
  Health, firewall rules, network settings and packages
2026-10-22 00:11:50 +03:00
Aemeath edeb1506fd Dawnline 0.9.0
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / ucode static checks (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 24.10) (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 25.12) (push) Blocked by required conditions
- Portal: Reconnect replaces New keys and the connection sheet (QR, Key,
  File, and the menu's QR, key and .conf items). It gives the device new
  keys, shows it as "Not set up yet" until it connects with them (in the
  admin too) and opens the set-up sheet on the new configuration; "Update
  the connection" goes the same way. Reconnect is orange in the menu
- iPhone: "Open in AmneziaVPN" is "Send to AmneziaVPN": the key goes in as
  a .vpn file from the share sheet. AmneziaVPN takes vpn:// links only on
  Android; on iOS Safari said the address was invalid, or another app that
  claims vpn:// got the key. The desktop "Open in AmneziaVPN" link is gone
- A computer set up from a phone: get the app, add the connection, then
  "Or open your link on the computer"; "Another app" offers AmneziaWG and
  WireGuard there too and step 2 follows the pick. "Other" devices pick any
  system (iPhone/iPad, Android, Windows, Mac, Linux); the page counts as the
  device in hand only when the pick is its own system
- Import steps in each app's own words (iOS "+ → Create from file or
  archive", Android "+ → Import from file or archive", Mac, Windows "Add
  Tunnel → Import tunnel(s) from file"); Linux gets the awg-quick command
- Files are shared only on iOS (on Android the apps take no shared files:
  a download there), and alone: with a title, "Save to Files" also wrote
  the title as a .txt
- Files and tunnels are named after the server ("Outline Home" →
  Outline-Home.conf and .vpn) in the form every client accepts: letters,
  digits and "-", 15 characters, no Windows device names. The admin's
  downloads keep the device in the name. The AmneziaVPN key's description
  is the server's name alone
- The AmneziaVPN QR code holds the key without "vpn://": AmneziaVPN's
  scanner decodes the text as it is and failed on the prefix
- "This device" also when the page is opened beside the tunnel: the apps
  route the VPN's own address, which the portal shares, around their
  tunnel, so the one online device whose tunnel comes from the page's
  address is the one
- Fixed: "Already has AmneziaVPN?Copy the key" lost its space
2026-10-19 05:19:08 +03:00
Aemeath 82ab86848e Dawnline 0.2.0
- Diagnostics page: Health and Log tabs in place of Health and Activity
- Watchdog: repairs the AmneziaWG module, tunnels, nft table, firewall
  rules, uhttpd portal setting, portal, resolver and rpcd after two bad
  checks in a row, with backoff; after 3 failed repairs logs once in red,
  keeps repairing quietly and logs "restored" when it works again
- Heartbeat cron job restarts a hung agent
- Service log: tunnel and service starts with reasons (restarted, router
  start, update, crash), stops Dawnline made itself vs unexpected ones,
  certificate renewal and expiry, WAN address changes
- Admin actions logged as "You ..." with their own icon and tint; every
  event has an icon tile; names kept for removed people and devices;
  server pill on events when there are several servers
- Log filters: All, Connections, People, System, Problems; search and the
  command palette removed
- Home network reaches people's devices: fw4 forwarding from the home
  zones, limited to people with home access
- "Devices reach each other" per server, in the Access card
- Portal: "This device" card first with a dotted border, key rotation and
  copy address in the menu, devices sorted Online/Offline/Not set up/Paused,
  over-limit slots in orange
- People cards: slot bar, Online / Never connected, add chip always shown
- Person and device pages: Add device tile, Connect at the bottom with
  File/Key/QR tabs, status text without dots; pulsing server tab dot
- Server pill: Running / Not running / Turned off
2026-10-15 17:05:24 +03:00
Aemeath a3910f8b97 Dawnline 0.1.0: AmneziaWG access server for OpenWrt
Build packages / Version (push) Waiting to run
LuCI admin (people, devices, limits, disguise, health, updates, backups)
and a personal self-service portal, built as ipk (OpenWrt 24.10) and apk
(OpenWrt 25.12) with the OpenWrt SDK. Successor of openwrt-liminal.

- install.sh: checks the router, installs AmneziaWG for its firmware,
  then the release package verified against sha256sums.txt
- CI: Prettier, types, tests, committed bundles, ShellCheck, ucode checks;
  tagged releases build both packages and publish them
- Web bundles minified with esbuild (JS and CSS)
- README with framed screenshots
2026-10-15 03:29:30 +03:00