fd9543ce68c69eaa06bb275d4914bf151420914e
9
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
fd9543ce68 |
Dawnline 0.7.0
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / ucode static checks (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 24.10) (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 25.12) (push) Blocked by required conditions
- Balanced, a new disguise for AmneziaWG 2.0 apps (AmneziaVPN 4.8.12 and newer): junk packets, padded cookie and data packets and DNS-shaped signature packets, for networks that learned to spot 1.0-style junk; offered when both the tools and the kernel module are 2.0 or newer - The junk count and sizes in a device's configuration are the device's own (shifted a little, deterministically), so two phones of one family do not share one profile; they never require importing again - Components remembers which AmneziaWG build was installed on which kernel; after a firmware upgrade Health says the build was for the old one and offers the build for the new firmware. A SNAPSHOT firmware is told there are no builds for it - Location lookups moved off the agent's 1-second watcher to its minute tick, a few per minute within a time budget; the cache lives in tmpfs and goes to flash hourly, and addresses still shown on the map are never pushed out of it (and looked up again) - The map library from the CDN is checked against its expected hash before it runs inside the LuCI page - The activity log is copied to flash only when something was logged; the person page and the device drawer fetch only that person's events - Admin UI: live updates survive the theme's in-page navigation, pollers stop with their page and sleep while the tab is hidden, the map is freed when leaving the Overview, a router that stops answering is said once (and when it is back), and an update of Dawnline under an open page asks for a reload - Watchdog: no repairs while an update runs; a target that keeps failing keeps its back-off (repairs are forgotten after ten good minutes, not one); the LuCI link is reloaded or restarted three times at most, not every hour for good; the one-click "ifup" fix accepts only Dawnline's own tunnels - Health warns when the router's flash is nearly full (settings would stop saving); the portal runs two processes instead of four on routers with little memory - "Remove their devices" at an end date is never done on a clock that has not been set yet |
||
|
|
31a2065f05 |
Dawnline 0.6.0
- Access rules fail closed: when the table cannot load, no device is loaded into the tunnels (the firewall alone would let every loaded device reach everything); an older table that survived a failed rebuild keeps its rules and a revoked device still leaves. The agent re-syncs within a minute when the table is gone - A change the router saved but could not put into effect (access rules that did not load, a server that refused its devices) is said in the admin UI instead of a plain "Saved" - The guard judges every packet, not only a connection's first: a change of access, a pause or a limit now cuts open connections too - Each server's home networks are its own: with several servers, "all home" on one no longer reaches the other's networks where firewall zones overlap - People limited to some home networks reach the router only on the addresses in those networks (LuCI and SSH on the main LAN stay closed) - Internet-only people can open their personal portal with the VPN on - Tunnel DNS reaches the resolver and the LAN's DNS from servers that do not forward to those zones on their own (Home-only names on servers without "like a home device", LAN DNS on servers with no home network) - A new personal link offers to remove the devices added through the old one, so a leaked link is really contained - Import and restore refuse an inconsistent file (devices with addresses outside their server, shared addresses, malformed keys, broken references); Health reports one, and the sync leaves such a device out instead of failing its server. A config write that did not reach flash is an error, not a silent success - Backups are kept per kind (nightly ones no longer push out manual or pre-delete ones), nightly and pre-change backups hold the config only, archives are written whole or not at all, and a failed nightly backup is logged. A restore no longer has its history overwritten by the agent's in-memory counters - Settings defaults and ranges come from one place (dawnline.schema) - Portal: anything not shaped like a personal link is answered by a shell before ucode starts (a scan on the root costs nothing); 4 portal processes at once instead of 16; a link may make 40 changes a quarter hour; over plain HTTP the page shows but configurations, new devices and new keys are refused with the HTTPS twin of the link; the connect sheet polls only while the first connection is awaited, with backoff, and stops once the link stopped working - Updates: after Dawnline's own package changes, a shell checks that LuCI reaches it and the agent runs, and puts the kept previous version back when they do not (automatic runs always keep it); the AmneziaWG module reload verifies rmmod and modprobe; installs check free space; on apk a reinstall that changed nothing is an error; uninstall.sh hands the update lock to the removal it calls; an upgrade restarts the service only where it was enabled; the release workflow pins the SDK images by digest and the actions by commit - AmneziaWG: features count only when both the tools and the kernel module have them; a server whose disguise this build cannot run (a 3.1 preset after a rollback to 2.0) is kept down and reported; Components tells 1.0 builds from 2.0 ones; `awg show dump` is parsed by shape; Maximum's DNS-shaped signature packets are made for each server and its keep-alive is a 25-35 s range - CI compiles every ucode file and runs the new tests/ucode unit tests (54 tests on the real libuci) in OpenWrt 24.10 and 25.12 rootfs containers; scripts/compile-ucode.sh does the same wherever ucode runs and scripts/ucode-container.sh locally with docker; lint-ucode checks POSIX regexes and module layering; a tag builds only after CI passes |
||
|
|
972e522518 |
Dawnline 0.5.0
Build packages / Version (push) Waiting to run
- Where people connect from is a globe map now: live arcs from each
person to the server, grey ones for the last 24 h, 7 or 30 days, avatars
instead of dots, the server's own marker, and a light map in light mode;
it zooms to fit the people shown and follows them as they come and go
- Markers that overlap move apart with a pointer to their spot; people
next to the server fold into a count on it; a click zooms in and opens a
floating card (never clipped by the map), closing flies back
- The person page maps where they connected from, older places fading;
the device panel lists its places in order, and connections from the LAN
or through the router's own address stay off the maps ("LAN" in grey)
- Setup and new servers check the UDP port (taken by another program, a
forward or another server) and the subnet (three numbers + .x, a private
range not in use) as you type; the default port is 4500
- The personal portal can share the server's port number (TCP beside UDP);
its port is checked against forwards and other services
- A new server comes up at once: the kernel module is loaded and the
network restarted when OpenWrt doesn't know AmneziaWG yet
- A turned-off server is a state of its own: no "tunnel down" or DNS
warnings, "Turned off" in yellow, a white Turn on, and people on it are
not shown as paused
- Pause everyone is removed: turning a server off does the same (a router
left paused keeps its servers off after the update)
- People: a stopped person's card fades and says why across its bottom,
with the one action that lifts it (Resume, +10 GB, Extend 1 month);
people held by a limit or end date sort below the others, paused last
- The person page shows the state as text ("Paused") with a Resume
button, also while their server is off
- The portal tells a paused or ended person just that, even with the
server off, and lets them change nothing until the admin lifts it (the
router refuses too); its notices look like Overview's
- Automatic MTU: with the field empty the tunnel, computers and routers
get 1380 minus AmneziaWG S4 (1368 on Maximum), phones and tablets 1280;
a typed MTU still caps phones and tablets at 1280, and servers on the
old default 1380 move to automatic (phones and tablets get "Update
config", their old files keep working)
- Only procd's agent runs: a second copy (started by hand or left over)
refuses to start or is ended within 5 minutes, so no more stray paused
and resumed events; a device that leaves the tunnel is offline at once
- The installer picks the newest release (it took the lowest), DNS
lookups can't hang, and tooltips and floating cards close on scroll and
on leaving the page
|
||
|
|
29b1d7dfd7 |
Dawnline 0.4.2
Build packages / Version (push) Waiting to run
- Connections show up at once: the agent looks at the tunnels every second and, the moment a device connects or roams, writes it to the activity log, updates traffic and the map, and locates the new address - A device counts as gone when its WireGuard session expires (1-3 min after it leaves), so a phone asleep no longer flaps between disconnect and connect - The admin pages follow along within seconds: Overview, People, the person page and the device panel refresh when something happens, with a light check every 2 s instead of reloading everything every 10 s - The personal portal no longer refreshes itself in the background: every request costs the router a CGI process, so it loads once and after the visitor's own changes - Agent guidance and code standards (backend, frontend, shell, UI) now live in the repository: AGENTS.md and rules/ |
||
|
|
34293fb8e5 |
Dawnline 0.4.0
Build packages / Version (push) Waiting to run
- Components tab replaces Updates: Dawnline, the AmneziaWG build for this firmware (Slava-Shchipunov 2.0 or 2Grey 3.1, Russian translation) and the system packages Dawnline adds, each checked, installed, reinstalled or rolled back in place, with What's new, versions and an activity log - Automatic updates: daily check, install at a set time or right away, per component; AmneziaWG is left out by default and an automatic run never switches its build or generation - Downloads verified against GitHub's sha256; mirrors are used only when GitHub is unreachable and the hash is known - New installer: checks firmware, clock, space and DNS, lets you pick a release, shows the plan and asks first; --dry-run - New uninstaller removes everything Dawnline added (cron, nft, firewall, routing, interfaces, packages it installed); --dry-run - Works without AmneziaWG on the router: Overview, the setup wizard, Health and Components say what is missing and offer to install it - Overview shows failed health checks as notices with their fix - People list no longer reads the config from the browser: private keys stay on the router; personal links are fetched on demand - Config changes are serialized under one lock, the nft table loads atomically and fails closed, and Dawnline never touches network sections it did not create - The portal never opens system ports, keeps disabled devices disabled, rate-limits per address and counts days by the router's clock - Settings and Diagnostics load their heavy parts in the background - Release notes are written from the commits since the previous release - Backend and admin UI split into small single-purpose modules |
||
|
|
70a932b8ea |
Dawnline 0.3.1
Build packages / Version (push) Waiting to run
- Find home devices (Bonjour) removed: iOS looks for services over the tunnel only under a search domain, and Android and Chromecast only over multicast, which WireGuard does not carry. Upgrading removes its server option and dnsmasq records - Home services still show the ports devices announce when umdns runs |
||
|
|
aa8256bc60 |
Dawnline 0.3.0
Build packages / Version (push) Waiting to run
- Access split into Internet and Home network cards; network tiles inline, Auto-detect LAN beside them, other interfaces folded by kind - Devices reach each other: Off, Everyone or Circles (per server); circles with names, colours and members; a person's own devices always see each other while it is not off - Per-person home networks: people can be kept out of some of the server's networks (nft lan_part set, AllowedIPs follow) - Home services moved from Settings to Access, added from the devices the router sees over DHCP (ports they announce over Bonjour when umdns runs) - Who reaches what (rules summed up per access) and Check access (walks the same rules as nft and the client configuration, step by step) - Find home devices (Bonjour): umdns services published as DNS-SD records in dnsmasq; installs umdns from Access - Connections from home show the DHCP name with the address in brackets - Repaints keep the scroll position |
||
|
|
82ab86848e |
Dawnline 0.2.0
- Diagnostics page: Health and Log tabs in place of Health and Activity - Watchdog: repairs the AmneziaWG module, tunnels, nft table, firewall rules, uhttpd portal setting, portal, resolver and rpcd after two bad checks in a row, with backoff; after 3 failed repairs logs once in red, keeps repairing quietly and logs "restored" when it works again - Heartbeat cron job restarts a hung agent - Service log: tunnel and service starts with reasons (restarted, router start, update, crash), stops Dawnline made itself vs unexpected ones, certificate renewal and expiry, WAN address changes - Admin actions logged as "You ..." with their own icon and tint; every event has an icon tile; names kept for removed people and devices; server pill on events when there are several servers - Log filters: All, Connections, People, System, Problems; search and the command palette removed - Home network reaches people's devices: fw4 forwarding from the home zones, limited to people with home access - "Devices reach each other" per server, in the Access card - Portal: "This device" card first with a dotted border, key rotation and copy address in the menu, devices sorted Online/Offline/Not set up/Paused, over-limit slots in orange - People cards: slot bar, Online / Never connected, add chip always shown - Person and device pages: Add device tile, Connect at the bottom with File/Key/QR tabs, status text without dots; pulsing server tab dot - Server pill: Running / Not running / Turned off |
||
|
|
a3910f8b97 |
Dawnline 0.1.0: AmneziaWG access server for OpenWrt
Build packages / Version (push) Waiting to run
LuCI admin (people, devices, limits, disguise, health, updates, backups) and a personal self-service portal, built as ipk (OpenWrt 24.10) and apk (OpenWrt 25.12) with the OpenWrt SDK. Successor of openwrt-liminal. - install.sh: checks the router, installs AmneziaWG for its firmware, then the release package verified against sha256sums.txt - CI: Prettier, types, tests, committed bundles, ShellCheck, ucode checks; tagged releases build both packages and publish them - Web bundles minified with esbuild (JS and CSS) - README with framed screenshots |