Commit Graph
7 Commits
Author SHA1 Message Date
Aemeath 466ca6c7b0 Dawnline 0.8.0
Build packages / CI (push) Blocked by required conditions
Build packages / Version (push) Waiting to run
CI / Web (format, types, tests, bundles) (push) Blocked by required conditions
CI / ShellCheck (push) Blocked by required conditions
CI / ucode static checks (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 24.10) (push) Blocked by required conditions
CI / ucode compiles and tests pass (OpenWrt 25.12) (push) Blocked by required conditions
- Every field says what is wrong as you type, in the router's own words,
  and Save refuses what the router would: UDP port when editing a server,
  MTU, keep-alive, public address, DNS for devices, person name, device
  limit, end date and data limit, device names (the next free "Phone 2"
  is offered), home services, circles, portal title, redirect and other
  addresses, defaults, update time
- Cyrillic names give Latin ids, hostnames and file names; names are
  counted in characters, the rule names the characters it refuses; end
  dates must exist on the calendar; a mistyped extra portal address is
  refused instead of dropped
- The public address is checked on the router as it is typed: points at
  this router, at another address, behind Cloudflare, or the WAN is
  private or CGNAT; the wizard says so before the first step, never
  pre-fills a private WAN address and says where its suggestion came
  from; the Connection card says when the server was last reached from
  the internet; IPv6 names and literals work throughout
- A person can be moved to another server from their page; a server's
  tunnel network can be changed in the Danger zone (devices are
  renumbered and marked "Update config"); WAN and LAN zones come from the
  router's actual devices; when the public IPv4 changed, one click puts
  the new one in
- Over the data limit or outside the allowed hours the tunnel stays
  connected and the portal explains why nothing gets through, instead of
  a silent handshake failure; Health's "devices loaded" compares the
  peers themselves, not their count
- Portal: install links for this platform, two first steps on a first
  visit, the phone's back button closes a sheet, the file goes through
  the share sheet into the app, two QR codes (AmneziaVPN camera, AmneziaWG
  and WireGuard apps), the sheet notices the first connection
- Admin: Enter submits a dialog, arrow keys walk the menus, Find in People
  ("/" focuses it), a device of a paused, ended or over-limit person says
  so, "Keep access" past its end date is said on the Overview, Allowed
  hours enforce nothing until saved, the invite card shares the link
- Health warns when another package's policy routing (mwan3, pbr) sends
  tunnel traffic past the home-device path
- CLI: person ls, device ls, log with -n, --since, --level, --src and
  --json; exit code 2 for an unknown command and 1 when health finds an
  error; person rm asks for --yes when devices would go; devices added
  from the command line get their event and "issued" marker like the
  UI's
- Three disguises: Off, Balanced and Maximum. Standard and Strong (1.0-style
  junk only, which networks learned to spot) are no longer offered; a server
  still on one keeps running and its card says to switch. A new server gets
  the strongest disguise its router can run
- Portal: setting up a device is one sheet with two steps. Get the app
  (AmneziaVPN first; AmneziaWG, and WireGuard with the disguise off, behind
  "Another app") from the store of the device in hand, with the GitHub release
  where no store has it and the version the server needs said once; then add
  the connection (open in AmneziaVPN, copy the key, share or download the
  file). A device set up from another device gets its link to take there, as a
  QR code for a phone; a phone set up from a computer also gets the connection
  as a code, one code revealed at a time so the camera cannot read the wrong one
- Portal motion: the first visit comes in once (blocks in reading order,
  meters fill, the sun rises in the logo); a repaint glides cards to their
  new places and brings changed values into focus; sheets slide up on
  phones and can be pulled down, come into focus on a computer, follow
  their content's height and turn into the next sheet in place; tabs and
  segments slide, menus, tooltips and toasts grow out of what opened them,
  copy buttons turn into a check, buttons waiting for the router spin;
  with reduced motion only the fades remain
- Portal: while a device is set up, a card at the top shows the way from
  it to the router with a light running along it; on the first connection
  the way fills green, the steps fold away and the sheet closes by itself.
  The first connection is the first fresh handshake, so it is no longer
  missed while the watcher catches up (or after new keys), and the device's
  card goes on to Connected
- Portal: QR codes are light dots on a black card, fuller on dense keys,
  with "Show a light code" for scanners that read only dark on light (every
  code switches, the choice is kept); the link and code a set-up sheet
  hands to another device open that device's set-up there at once
- Portal: Remove and New keys ask in a small alert with the action's icon;
  the open one of two cards is not a button; device names are no longer
  repeated in every line of the set-up sheet; the code card lines up with
  the rest of its card (a class clash gave it the page's padding); text
  keeps the arrow cursor, store badges and link buttons are not underlined
2026-10-18 23:28:10 +03:00
Aemeath 2b98abdba4 Dawnline 0.5.2
- Fixed: a new server with the Maximum disguise could not be created ("jmin=10
  (64-1024)"): the 3.1 preset's small junk packets failed Dawnline's own check
- Fixed: guesses from a shared address (every visitor behind Cloudflare) could
  lock people with valid links out of the portal for 15 minutes; a valid link
  always opens now, only wrong guesses are counted
- Fixed: a disabled Dawnline still loaded every device into the tunnels when
  netifd brought them up, with nothing enforcing end dates or limits afterwards
- Fixed: an MTU of 1380 chosen by hand was deleted on every apply (the one-time
  switch to automatic MTU now runs once)
- Locations (city lookups) are off by default on new installs: they send
  people's addresses to a third party. Routers that had them on keep them on
- "Don't warn" before an end date is honoured, and the warning window is the
  one chosen for the person on the Overview, People, the person page and the
  portal alike (People and Overview used to warn 3 days before whatever was set)
- "Ends today" and "ends tomorrow" instead of "ends in 1 day"
- Renaming a person keeps the dialog open when the router refuses the name
- Settings → Portal no longer saves a listening port its own help line marks
  as taken
- "Remove Dawnline" is live only once "remove" is typed
- Downloaded .conf files are named after the device first, and two devices
  whose names only differ past the 15th character no longer get the same file
  (and tunnel name in the app)
2026-10-18 14:42:01 +03:00
Aemeath 972e522518 Dawnline 0.5.0
Build packages / Version (push) Waiting to run
- Where people connect from is a globe map now: live arcs from each
  person to the server, grey ones for the last 24 h, 7 or 30 days, avatars
  instead of dots, the server's own marker, and a light map in light mode;
  it zooms to fit the people shown and follows them as they come and go
- Markers that overlap move apart with a pointer to their spot; people
  next to the server fold into a count on it; a click zooms in and opens a
  floating card (never clipped by the map), closing flies back
- The person page maps where they connected from, older places fading;
  the device panel lists its places in order, and connections from the LAN
  or through the router's own address stay off the maps ("LAN" in grey)
- Setup and new servers check the UDP port (taken by another program, a
  forward or another server) and the subnet (three numbers + .x, a private
  range not in use) as you type; the default port is 4500
- The personal portal can share the server's port number (TCP beside UDP);
  its port is checked against forwards and other services
- A new server comes up at once: the kernel module is loaded and the
  network restarted when OpenWrt doesn't know AmneziaWG yet
- A turned-off server is a state of its own: no "tunnel down" or DNS
  warnings, "Turned off" in yellow, a white Turn on, and people on it are
  not shown as paused
- Pause everyone is removed: turning a server off does the same (a router
  left paused keeps its servers off after the update)
- People: a stopped person's card fades and says why across its bottom,
  with the one action that lifts it (Resume, +10 GB, Extend 1 month);
  people held by a limit or end date sort below the others, paused last
- The person page shows the state as text ("Paused") with a Resume
  button, also while their server is off
- The portal tells a paused or ended person just that, even with the
  server off, and lets them change nothing until the admin lifts it (the
  router refuses too); its notices look like Overview's
- Automatic MTU: with the field empty the tunnel, computers and routers
  get 1380 minus AmneziaWG S4 (1368 on Maximum), phones and tablets 1280;
  a typed MTU still caps phones and tablets at 1280, and servers on the
  old default 1380 move to automatic (phones and tablets get "Update
  config", their old files keep working)
- Only procd's agent runs: a second copy (started by hand or left over)
  refuses to start or is ended within 5 minutes, so no more stray paused
  and resumed events; a device that leaves the tunnel is offline at once
- The installer picks the newest release (it took the lowest), DNS
  lookups can't hang, and tooltips and floating cards close on scroll and
  on leaving the page
2026-10-17 01:03:23 +03:00
Aemeath 29b1d7dfd7 Dawnline 0.4.2
Build packages / Version (push) Waiting to run
- Connections show up at once: the agent looks at the tunnels every
  second and, the moment a device connects or roams, writes it to the
  activity log, updates traffic and the map, and locates the new address
- A device counts as gone when its WireGuard session expires (1-3 min
  after it leaves), so a phone asleep no longer flaps between
  disconnect and connect
- The admin pages follow along within seconds: Overview, People, the
  person page and the device panel refresh when something happens, with
  a light check every 2 s instead of reloading everything every 10 s
- The personal portal no longer refreshes itself in the background:
  every request costs the router a CGI process, so it loads once and
  after the visitor's own changes
- Agent guidance and code standards (backend, frontend, shell, UI) now
  live in the repository: AGENTS.md and rules/
2026-10-16 03:52:21 +03:00
Aemeath 34293fb8e5 Dawnline 0.4.0
Build packages / Version (push) Waiting to run
- Components tab replaces Updates: Dawnline, the AmneziaWG build for this
  firmware (Slava-Shchipunov 2.0 or 2Grey 3.1, Russian translation) and
  the system packages Dawnline adds, each checked, installed, reinstalled
  or rolled back in place, with What's new, versions and an activity log
- Automatic updates: daily check, install at a set time or right away,
  per component; AmneziaWG is left out by default and an automatic run
  never switches its build or generation
- Downloads verified against GitHub's sha256; mirrors are used only when
  GitHub is unreachable and the hash is known
- New installer: checks firmware, clock, space and DNS, lets you pick a
  release, shows the plan and asks first; --dry-run
- New uninstaller removes everything Dawnline added (cron, nft, firewall,
  routing, interfaces, packages it installed); --dry-run
- Works without AmneziaWG on the router: Overview, the setup wizard,
  Health and Components say what is missing and offer to install it
- Overview shows failed health checks as notices with their fix
- People list no longer reads the config from the browser: private keys
  stay on the router; personal links are fetched on demand
- Config changes are serialized under one lock, the nft table loads
  atomically and fails closed, and Dawnline never touches network
  sections it did not create
- The portal never opens system ports, keeps disabled devices disabled,
  rate-limits per address and counts days by the router's clock
- Settings and Diagnostics load their heavy parts in the background
- Release notes are written from the commits since the previous release
- Backend and admin UI split into small single-purpose modules
2026-10-16 02:14:15 +03:00
Aemeath 82ab86848e Dawnline 0.2.0
- Diagnostics page: Health and Log tabs in place of Health and Activity
- Watchdog: repairs the AmneziaWG module, tunnels, nft table, firewall
  rules, uhttpd portal setting, portal, resolver and rpcd after two bad
  checks in a row, with backoff; after 3 failed repairs logs once in red,
  keeps repairing quietly and logs "restored" when it works again
- Heartbeat cron job restarts a hung agent
- Service log: tunnel and service starts with reasons (restarted, router
  start, update, crash), stops Dawnline made itself vs unexpected ones,
  certificate renewal and expiry, WAN address changes
- Admin actions logged as "You ..." with their own icon and tint; every
  event has an icon tile; names kept for removed people and devices;
  server pill on events when there are several servers
- Log filters: All, Connections, People, System, Problems; search and the
  command palette removed
- Home network reaches people's devices: fw4 forwarding from the home
  zones, limited to people with home access
- "Devices reach each other" per server, in the Access card
- Portal: "This device" card first with a dotted border, key rotation and
  copy address in the menu, devices sorted Online/Offline/Not set up/Paused,
  over-limit slots in orange
- People cards: slot bar, Online / Never connected, add chip always shown
- Person and device pages: Add device tile, Connect at the bottom with
  File/Key/QR tabs, status text without dots; pulsing server tab dot
- Server pill: Running / Not running / Turned off
2026-10-15 17:05:24 +03:00
Aemeath a3910f8b97 Dawnline 0.1.0: AmneziaWG access server for OpenWrt
Build packages / Version (push) Waiting to run
LuCI admin (people, devices, limits, disguise, health, updates, backups)
and a personal self-service portal, built as ipk (OpenWrt 24.10) and apk
(OpenWrt 25.12) with the OpenWrt SDK. Successor of openwrt-liminal.

- install.sh: checks the router, installs AmneziaWG for its firmware,
  then the release package verified against sha256sums.txt
- CI: Prettier, types, tests, committed bundles, ShellCheck, ucode checks;
  tagged releases build both packages and publish them
- Web bundles minified with esbuild (JS and CSS)
- README with framed screenshots
2026-10-15 03:29:30 +03:00