- Access rules fail closed: when the table cannot load, no device is loaded
into the tunnels (the firewall alone would let every loaded device reach
everything); an older table that survived a failed rebuild keeps its rules
and a revoked device still leaves. The agent re-syncs within a minute when
the table is gone
- A change the router saved but could not put into effect (access rules that
did not load, a server that refused its devices) is said in the admin UI
instead of a plain "Saved"
- The guard judges every packet, not only a connection's first: a change of
access, a pause or a limit now cuts open connections too
- Each server's home networks are its own: with several servers, "all home"
on one no longer reaches the other's networks where firewall zones overlap
- People limited to some home networks reach the router only on the
addresses in those networks (LuCI and SSH on the main LAN stay closed)
- Internet-only people can open their personal portal with the VPN on
- Tunnel DNS reaches the resolver and the LAN's DNS from servers that do not
forward to those zones on their own (Home-only names on servers without
"like a home device", LAN DNS on servers with no home network)
- A new personal link offers to remove the devices added through the old one,
so a leaked link is really contained
- Import and restore refuse an inconsistent file (devices with addresses
outside their server, shared addresses, malformed keys, broken references);
Health reports one, and the sync leaves such a device out instead of
failing its server. A config write that did not reach flash is an error,
not a silent success
- Backups are kept per kind (nightly ones no longer push out manual or
pre-delete ones), nightly and pre-change backups hold the config only,
archives are written whole or not at all, and a failed nightly backup is
logged. A restore no longer has its history overwritten by the agent's
in-memory counters
- Settings defaults and ranges come from one place (dawnline.schema)
- Portal: anything not shaped like a personal link is answered by a shell
before ucode starts (a scan on the root costs nothing); 4 portal processes
at once instead of 16; a link may make 40 changes a quarter hour; over
plain HTTP the page shows but configurations, new devices and new keys are
refused with the HTTPS twin of the link; the connect sheet polls only while
the first connection is awaited, with backoff, and stops once the link
stopped working
- Updates: after Dawnline's own package changes, a shell checks that LuCI
reaches it and the agent runs, and puts the kept previous version back when
they do not (automatic runs always keep it); the AmneziaWG module reload
verifies rmmod and modprobe; installs check free space; on apk a reinstall
that changed nothing is an error; uninstall.sh hands the update lock to the
removal it calls; an upgrade restarts the service only where it was
enabled; the release workflow pins the SDK images by digest and the actions
by commit
- AmneziaWG: features count only when both the tools and the kernel module
have them; a server whose disguise this build cannot run (a 3.1 preset
after a rollback to 2.0) is kept down and reported; Components tells 1.0
builds from 2.0 ones; `awg show dump` is parsed by shape; Maximum's
DNS-shaped signature packets are made for each server and its keep-alive
is a 25-35 s range
- CI compiles every ucode file and runs the new tests/ucode unit tests (54
tests on the real libuci) in OpenWrt 24.10 and 25.12 rootfs containers;
scripts/compile-ucode.sh does the same wherever ucode runs and
scripts/ucode-container.sh locally with docker; lint-ucode checks POSIX
regexes and module layering; a tag builds only after CI passes
- Fixed: a new server with the Maximum disguise could not be created ("jmin=10
(64-1024)"): the 3.1 preset's small junk packets failed Dawnline's own check
- Fixed: guesses from a shared address (every visitor behind Cloudflare) could
lock people with valid links out of the portal for 15 minutes; a valid link
always opens now, only wrong guesses are counted
- Fixed: a disabled Dawnline still loaded every device into the tunnels when
netifd brought them up, with nothing enforcing end dates or limits afterwards
- Fixed: an MTU of 1380 chosen by hand was deleted on every apply (the one-time
switch to automatic MTU now runs once)
- Locations (city lookups) are off by default on new installs: they send
people's addresses to a third party. Routers that had them on keep them on
- "Don't warn" before an end date is honoured, and the warning window is the
one chosen for the person on the Overview, People, the person page and the
portal alike (People and Overview used to warn 3 days before whatever was set)
- "Ends today" and "ends tomorrow" instead of "ends in 1 day"
- Renaming a person keeps the dialog open when the router refuses the name
- Settings → Portal no longer saves a listening port its own help line marks
as taken
- "Remove Dawnline" is live only once "remove" is typed
- Downloaded .conf files are named after the device first, and two devices
whose names only differ past the 15th character no longer get the same file
(and tunnel name in the app)
- The map places everyone within their city: the IP gives the city
alone, so each person gets a fixed spot of their own in it (1.5-5 km
from its centre, clear of the server and of each other)
- People who would cover each other share one plate with their avatars
and the city once, and people on top of the server ride in the
server's plate (no more pointers, repeated labels or counts); zooming
in they part to their own spots
- Avatars in a plate keep their device badges (round for one device);
a click on an avatar opens that person's card, flying to them first
when they are elsewhere, and a click on a plate brings its people into
view, at city level when they share one, close enough to part
- Plates follow the zoom: compact far out (small avatars, no badges or
place names), small badges at country level, full size closer in
- Plates slide, grow and shrink smoothly: avatars glide to their places,
"+N" changes in place, and the plate's width follows
- Fixed: a hovered person could stay highlighted (everyone else faded)
after their plate split under the pointer
- Overview's Online tile: small avatars light up with a halo round their
ring, and the device badge no longer cuts a dark square into the hover
- Where people connect from is a globe map now: live arcs from each
person to the server, grey ones for the last 24 h, 7 or 30 days, avatars
instead of dots, the server's own marker, and a light map in light mode;
it zooms to fit the people shown and follows them as they come and go
- Markers that overlap move apart with a pointer to their spot; people
next to the server fold into a count on it; a click zooms in and opens a
floating card (never clipped by the map), closing flies back
- The person page maps where they connected from, older places fading;
the device panel lists its places in order, and connections from the LAN
or through the router's own address stay off the maps ("LAN" in grey)
- Setup and new servers check the UDP port (taken by another program, a
forward or another server) and the subnet (three numbers + .x, a private
range not in use) as you type; the default port is 4500
- The personal portal can share the server's port number (TCP beside UDP);
its port is checked against forwards and other services
- A new server comes up at once: the kernel module is loaded and the
network restarted when OpenWrt doesn't know AmneziaWG yet
- A turned-off server is a state of its own: no "tunnel down" or DNS
warnings, "Turned off" in yellow, a white Turn on, and people on it are
not shown as paused
- Pause everyone is removed: turning a server off does the same (a router
left paused keeps its servers off after the update)
- People: a stopped person's card fades and says why across its bottom,
with the one action that lifts it (Resume, +10 GB, Extend 1 month);
people held by a limit or end date sort below the others, paused last
- The person page shows the state as text ("Paused") with a Resume
button, also while their server is off
- The portal tells a paused or ended person just that, even with the
server off, and lets them change nothing until the admin lifts it (the
router refuses too); its notices look like Overview's
- Automatic MTU: with the field empty the tunnel, computers and routers
get 1380 minus AmneziaWG S4 (1368 on Maximum), phones and tablets 1280;
a typed MTU still caps phones and tablets at 1280, and servers on the
old default 1380 move to automatic (phones and tablets get "Update
config", their old files keep working)
- Only procd's agent runs: a second copy (started by hand or left over)
refuses to start or is ended within 5 minutes, so no more stray paused
and resumed events; a device that leaves the tunnel is offline at once
- The installer picks the newest release (it took the lowest), DNS
lookups can't hang, and tooltips and floating cards close on scroll and
on leaving the page
- Connections show up at once: the agent looks at the tunnels every
second and, the moment a device connects or roams, writes it to the
activity log, updates traffic and the map, and locates the new address
- A device counts as gone when its WireGuard session expires (1-3 min
after it leaves), so a phone asleep no longer flaps between
disconnect and connect
- The admin pages follow along within seconds: Overview, People, the
person page and the device panel refresh when something happens, with
a light check every 2 s instead of reloading everything every 10 s
- The personal portal no longer refreshes itself in the background:
every request costs the router a CGI process, so it loads once and
after the visitor's own changes
- Agent guidance and code standards (backend, frontend, shell, UI) now
live in the repository: AGENTS.md and rules/
- Fixed: with a transparent proxy on the router (Clash, sing-box and
others that mark the router's own traffic for tproxy), the portal and
AmneziaWG answered nobody outside the LAN: their replies were diverted
into the proxy, so visitors saw timeouts (Cloudflare 522) and devices
could not connect from outside
- Dawnline's own answers now leave by the main table through a small nft
table (inet dawnline_reply) that clears only the proxy's mark on them;
it follows the proxy within a minute when one starts later, and the old
priority-90 policy rules, which never matched, are removed
- Health's "answers reach" checks read that table, and the uninstaller
removes it
- Components tab replaces Updates: Dawnline, the AmneziaWG build for this
firmware (Slava-Shchipunov 2.0 or 2Grey 3.1, Russian translation) and
the system packages Dawnline adds, each checked, installed, reinstalled
or rolled back in place, with What's new, versions and an activity log
- Automatic updates: daily check, install at a set time or right away,
per component; AmneziaWG is left out by default and an automatic run
never switches its build or generation
- Downloads verified against GitHub's sha256; mirrors are used only when
GitHub is unreachable and the hash is known
- New installer: checks firmware, clock, space and DNS, lets you pick a
release, shows the plan and asks first; --dry-run
- New uninstaller removes everything Dawnline added (cron, nft, firewall,
routing, interfaces, packages it installed); --dry-run
- Works without AmneziaWG on the router: Overview, the setup wizard,
Health and Components say what is missing and offer to install it
- Overview shows failed health checks as notices with their fix
- People list no longer reads the config from the browser: private keys
stay on the router; personal links are fetched on demand
- Config changes are serialized under one lock, the nft table loads
atomically and fails closed, and Dawnline never touches network
sections it did not create
- The portal never opens system ports, keeps disabled devices disabled,
rate-limits per address and counts days by the router's clock
- Settings and Diagnostics load their heavy parts in the background
- Release notes are written from the commits since the previous release
- Backend and admin UI split into small single-purpose modules
- Find home devices (Bonjour) removed: iOS looks for services over the
tunnel only under a search domain, and Android and Chromecast only over
multicast, which WireGuard does not carry. Upgrading removes its server
option and dnsmasq records
- Home services still show the ports devices announce when umdns runs
- Access split into Internet and Home network cards; network tiles inline,
Auto-detect LAN beside them, other interfaces folded by kind
- Devices reach each other: Off, Everyone or Circles (per server); circles
with names, colours and members; a person's own devices always see each
other while it is not off
- Per-person home networks: people can be kept out of some of the server's
networks (nft lan_part set, AllowedIPs follow)
- Home services moved from Settings to Access, added from the devices the
router sees over DHCP (ports they announce over Bonjour when umdns runs)
- Who reaches what (rules summed up per access) and Check access (walks the
same rules as nft and the client configuration, step by step)
- Find home devices (Bonjour): umdns services published as DNS-SD records in
dnsmasq; installs umdns from Access
- Connections from home show the DHCP name with the address in brackets
- Repaints keep the scroll position
- Diagnostics page: Health and Log tabs in place of Health and Activity
- Watchdog: repairs the AmneziaWG module, tunnels, nft table, firewall
rules, uhttpd portal setting, portal, resolver and rpcd after two bad
checks in a row, with backoff; after 3 failed repairs logs once in red,
keeps repairing quietly and logs "restored" when it works again
- Heartbeat cron job restarts a hung agent
- Service log: tunnel and service starts with reasons (restarted, router
start, update, crash), stops Dawnline made itself vs unexpected ones,
certificate renewal and expiry, WAN address changes
- Admin actions logged as "You ..." with their own icon and tint; every
event has an icon tile; names kept for removed people and devices;
server pill on events when there are several servers
- Log filters: All, Connections, People, System, Problems; search and the
command palette removed
- Home network reaches people's devices: fw4 forwarding from the home
zones, limited to people with home access
- "Devices reach each other" per server, in the Access card
- Portal: "This device" card first with a dotted border, key rotation and
copy address in the menu, devices sorted Online/Offline/Not set up/Paused,
over-limit slots in orange
- People cards: slot bar, Online / Never connected, add chip always shown
- Person and device pages: Add device tile, Connect at the bottom with
File/Key/QR tabs, status text without dots; pulsing server tab dot
- Server pill: Running / Not running / Turned off
- Fix "Cannot set properties of undefined (setting '_class')" after adding
a person on a server page: kept Overview/People tabs are taken out before
dom.content() wipes their LuCI registry
- No portal links while the personal portal is off
- "Off" disguise writes a plain WireGuard config (no neutral Jc..H4 lines)
- Setup wizard: Settings-style groups, portal off by default, "Internet like
a home device" switch; no "Link path" (server ids are picked by the router)
- Server ids and imported section names may not contain dashes
- Health: Cloudflare-proxied endpoint and portal address are not warnings
- Themes other than Outline: solid menus, drawer, palette, toasts and tooltips
(Bootstrap colour tokens as fallbacks), custom select chevron
- Server section tabs scroll sideways instead of wrapping; centred empty
People list; wider search; "1 device" in the palette
- lint-ucode: exported functions must end with "};"
LuCI admin (people, devices, limits, disguise, health, updates, backups)
and a personal self-service portal, built as ipk (OpenWrt 24.10) and apk
(OpenWrt 25.12) with the OpenWrt SDK. Successor of openwrt-liminal.
- install.sh: checks the router, installs AmneziaWG for its firmware,
then the release package verified against sha256sums.txt
- CI: Prettier, types, tests, committed bundles, ShellCheck, ucode checks;
tagged releases build both packages and publish them
- Web bundles minified with esbuild (JS and CSS)
- README with framed screenshots