Dawnline 0.6.0

- Access rules fail closed: when the table cannot load, no device is loaded
  into the tunnels (the firewall alone would let every loaded device reach
  everything); an older table that survived a failed rebuild keeps its rules
  and a revoked device still leaves. The agent re-syncs within a minute when
  the table is gone
- A change the router saved but could not put into effect (access rules that
  did not load, a server that refused its devices) is said in the admin UI
  instead of a plain "Saved"
- The guard judges every packet, not only a connection's first: a change of
  access, a pause or a limit now cuts open connections too
- Each server's home networks are its own: with several servers, "all home"
  on one no longer reaches the other's networks where firewall zones overlap
- People limited to some home networks reach the router only on the
  addresses in those networks (LuCI and SSH on the main LAN stay closed)
- Internet-only people can open their personal portal with the VPN on
- Tunnel DNS reaches the resolver and the LAN's DNS from servers that do not
  forward to those zones on their own (Home-only names on servers without
  "like a home device", LAN DNS on servers with no home network)
- A new personal link offers to remove the devices added through the old one,
  so a leaked link is really contained
- Import and restore refuse an inconsistent file (devices with addresses
  outside their server, shared addresses, malformed keys, broken references);
  Health reports one, and the sync leaves such a device out instead of
  failing its server. A config write that did not reach flash is an error,
  not a silent success
- Backups are kept per kind (nightly ones no longer push out manual or
  pre-delete ones), nightly and pre-change backups hold the config only,
  archives are written whole or not at all, and a failed nightly backup is
  logged. A restore no longer has its history overwritten by the agent's
  in-memory counters
- Settings defaults and ranges come from one place (dawnline.schema)
- Portal: anything not shaped like a personal link is answered by a shell
  before ucode starts (a scan on the root costs nothing); 4 portal processes
  at once instead of 16; a link may make 40 changes a quarter hour; over
  plain HTTP the page shows but configurations, new devices and new keys are
  refused with the HTTPS twin of the link; the connect sheet polls only while
  the first connection is awaited, with backoff, and stops once the link
  stopped working
- Updates: after Dawnline's own package changes, a shell checks that LuCI
  reaches it and the agent runs, and puts the kept previous version back when
  they do not (automatic runs always keep it); the AmneziaWG module reload
  verifies rmmod and modprobe; installs check free space; on apk a reinstall
  that changed nothing is an error; uninstall.sh hands the update lock to the
  removal it calls; an upgrade restarts the service only where it was
  enabled; the release workflow pins the SDK images by digest and the actions
  by commit
- AmneziaWG: features count only when both the tools and the kernel module
  have them; a server whose disguise this build cannot run (a 3.1 preset
  after a rollback to 2.0) is kept down and reported; Components tells 1.0
  builds from 2.0 ones; `awg show dump` is parsed by shape; Maximum's
  DNS-shaped signature packets are made for each server and its keep-alive
  is a 25-35 s range
- CI compiles every ucode file and runs the new tests/ucode unit tests (54
  tests on the real libuci) in OpenWrt 24.10 and 25.12 rootfs containers;
  scripts/compile-ucode.sh does the same wherever ucode runs and
  scripts/ucode-container.sh locally with docker; lint-ucode checks POSIX
  regexes and module layering; a tag builds only after CI passes
This commit is contained in:
Aemeath committed 2026-10-18 15:32:27 +03:00
1 parent 2b98abdba4
commit 31a2065f05
70 files changed
+2008 -307

No files matched your search

+90
View File
@@ -0,0 +1,90 @@
// dawnline.awg: disguise presets against their own validation, and the parser
// of `awg show all dump` on the output formats of AmneziaWG 1.0, 2.0 and 3.1
// (the stand-in awg in fixtures/bin prints the fixture put at AWG_DUMP).
import { readfile, writefile, unlink } from 'fs';
import * as awg from 'dawnline.awg';
const AWG_DUMP = '/tmp/dawnline-tests/awg-dump';
let fixtures = sourcepath(0, true) + '/fixtures';
test('obf_preset off', () => {
let o = awg.obf_preset('off');
eq(o, { jc: '0', jmin: '0', jmax: '0', s1: '0', s2: '0', h1: '1', h2: '2', h3: '3', h4: '4' }, 'plain WireGuard headers');
eq(awg.obf_errors(o), [], 'valid');
});
test('obf_preset standard and strong', () => {
for (let name in [ 'standard', 'strong' ])
for (let i = 0; i < 25; i++) {
let o = awg.obf_preset(name);
eq(awg.obf_errors(o), [], `${name} is valid`);
let jc = +o.jc, jmin = +o.jmin, jmax = +o.jmax;
ok(name == 'strong' ? jc >= 6 && jc <= 10 : jc >= 3 && jc <= 6, `${name} jc=${o.jc}`);
ok(jmin >= 64 && jmax > jmin && jmax <= 1024, `${name} junk sizes ${o.jmin}-${o.jmax}`);
ok(+o.s1 + 56 != +o.s2, 's1 + 56 != s2');
eq(length(uniq([ o.h1, o.h2, o.h3, o.h4 ])), 4, 'distinct headers');
for (let k in [ 'h1', 'h2', 'h3', 'h4' ])
ok(+o[k] >= 5, `${k} above the reserved values`);
eq(o.s3, null, 'no 2.0 values');
}
});
test('obf_preset max', () => {
let o = awg.obf_preset('max');
eq(o.header_protection_key, 'yAnz5TF+lXXJte14tji3zlMNq+hd2rYUIgJBgB3fBmk=', 'key from awg genkey');
ok(+o.jc >= 4 && +o.jc <= 6, 'jc');
ok(substr(o.i1, 0, 3) == '<r ', 'DNS-like first packet');
eq([ o.random_trailers, o.disable_cookies, o.content_padding_addition ], [ 'on', 'on', '10-100' ], '3.1 options');
ok(substr(o.i2, 0, 3) == '<r ', 'DNS-answer second packet');
ok(o.i1 != awg.obf_preset('max').i1, 'signature packets differ between servers');
// The preset passes the server's own validation (jmin/jmax may be small: 0.5.2).
eq(awg.obf_errors(o), [], 'max is valid');
});
test('obf_errors', () => {
eq(awg.obf_errors({}), [], 'nothing set');
eq(awg.obf_errors({ jc: '11' }), [ 'jc=11 (0-10)' ], 'jc range');
eq(awg.obf_errors({ jmin: '0', jmax: '0' }), [], 'zero junk sizes are allowed');
eq(awg.obf_errors({ jmin: '2000' }), [ 'jmin=2000 (0-1024)' ], 'jmin range');
eq(awg.obf_errors({ jmin: '200', jmax: '100' }), [ 'jmin > jmax' ], 'order');
eq(awg.obf_errors({ s1: '5', s2: '61' }), [ 's1 + 56 = s2' ], 'the handshake size clash');
eq(awg.obf_errors({ s4: '33' }), [ 's4=33 (0-32)' ], 's4 range');
eq(awg.obf_errors({ jc: 'x' }), [ 'jc=x (0-10)' ], 'not a number');
eq(awg.obf_errors({ h1: '7', h2: '7' }), [ 'h1-h4 must be distinct' ], 'duplicate headers');
eq(awg.obf_errors({ h1: '7-9', h2: 'abc' }), [ 'h2 must be a number or range' ], 'header ranges');
eq(awg.obf_neutral({ jc: '0', jmin: '0', jmax: '0', s1: '0', s2: '0', h1: '1', h2: '2', h3: '3', h4: '4' }), true, 'off is neutral');
eq(awg.obf_neutral({ jc: '4', jmin: '64', jmax: '128' }), false, 'junk is not neutral');
});
function dump_of(name) {
writefile(AWG_DUMP, readfile(`${fixtures}/awg-dump-${name}.txt`));
return awg.dump();
}
test('dump: AmneziaWG 1.0 (14 interface fields)', () => {
let d = dump_of('1.0');
eq(d.ok, true, 'ok');
eq(d.ifaces, { awgmain: { public_key: 'xTIBA5rboUvnH4htodjb6e697QjLERt1NAB4mZqp8Dg=', port: 51820 } }, 'interface');
eq(d.peers['HIgo9xNzJMWLKASShiTqIybxZ0U3wGLiUeJ1PKf8ykw='],
{ ifname: 'awgmain', endpoint: '203.0.113.7:41821', handshake: 1760000000, rx: 123456, tx: 654321 }, 'peer with a session');
eq(d.peers['TrMvSoP4jYQlY6RIzBgbssQqY3vxI2Pi+y71lOWWXX0='],
{ ifname: 'awgmain', endpoint: '', handshake: 0, rx: 0, tx: 0 }, 'peer that never connected');
});
test('dump: AmneziaWG 2.0 (33 interface fields)', () => {
let d = dump_of('2.0');
eq(d.ifaces, { awgmain: { public_key: 'xTIBA5rboUvnH4htodjb6e697QjLERt1NAB4mZqp8Dg=', port: 51820 } }, 'interface');
eq(keys(d.peers), [ 'HIgo9xNzJMWLKASShiTqIybxZ0U3wGLiUeJ1PKf8ykw=' ], 'one peer');
});
test('dump: AmneziaWG 3.1 (33 interface fields, protection on)', () => {
let d = dump_of('3.1');
eq(d.ifaces, { awgmain: { public_key: 'xTIBA5rboUvnH4htodjb6e697QjLERt1NAB4mZqp8Dg=', port: 51820 } }, 'interface');
eq(length(d.peers), 2, 'two peers');
});
test('dump: the tool fails', () => {
unlink(AWG_DUMP);
let d = awg.dump();
eq(d, { ok: false, ifaces: {}, peers: {} }, 'nothing known');
});